Replacement Shroud for Coleman Model 7333-883 Mach 3 Air Conditioner

Question

Question:

replacement shroud for coleman model 7333-883. can you help find the right replacement ???

asked by: Duane

1

Helpful Expert Reply:

Your model number 7333-883 is for a Coleman Mach 3. The MaxxAir TuffMaxx Replacement Shroud - White # MA00-325001. This replacement mounts like the original and includes the stainless steel hardware. I've attached a video to further assist.

expert reply by: Jason S

1

Answer 1

From previous customers with a Coleman TSR air conditioner that gave us dimensions we have the MaxxAir TuffMaxx Replacement Shroud #MA00-325001 that we've been able to confirm as a fit.

view full answer...

Answer 2

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 3

Yes, I spoke with my contact at MaxxAir who said that the Coleman Mach 3 and the Mach 3 Plus are the same unit. Since the MaxxAir TuffMaxx Replacement Shroud #MA00-325001 fits the Mach 3 it will also fit your Mach 3 Plus! I have attached a review…

view full answer...

Answer 4

I was unable to find any reference to the numbers you listed, but based on the dimensions you gave my best guess is you need the MaxxAir Replacement Shroud for Coleman-Mach / RVP Brand RV Air Conditioners #MA8335A5261. This is for older…

view full answer...

Answer 5

Based off the model number you provided it looks like you've got a RVP Coleman unit, which means the replacement shroud you need is the part #MA8335A5261.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Answer 10

Hello Jason. I can definitely point you in the right direction. I was not able to find any references for the Model 6250c907 that would tell me exactly what cover you need, but I can provide dimensions for the covers you mentioned. The Replacement RV…

view full answer...

Answer 11

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 12

Correct, the Replacement RV Air Conditioner Cover for MaxxAir TuffMaxx Units #MA00-325001 you're looking at will work with your Coleman AC. This shroud measures 41-5/8" long x 29-3/8" wide x 12-3/4" tall, so it'll have plenty…

view full answer...