Where are Roadmaster 64 Inch Safety Cables Measured From?

Question

Question:

Where do you measure from to get 64”?

asked by: Judith M

0

Expert Reply:

The Roadmaster 64" Single Hook, Straight Safety Cables # RM-645 is the overall length of the unit. If you are at all concerned with the amount of length I highly recommend going to a longer cable such as the 76" # RM-645-76 or the 80" Double Hook # RM-674.

expert reply by: Kyle S

0

Answer 1

For the Roadmaster Sterling Tow Bar the recommended length for replacement safety cables is 80 inches. Roadmaster lists the coiled cables part #RM-674 which are coiled only for a small portion of the cable and are straight for the rest of it.

view full answer...

Answer 2

The Roadmaster Sterling tow bar Item #RM-576 is compatible with the Roadmaster Direct-Connect Base Plate Kit Item #RM-524431-5 however, the safety cables are not. The current safety cables would need to be removed and you would not use the quick…

view full answer...

Answer 3

The safety cables I highly recommend are from Roadmaster, the Single Hook, Straight Safety Cables. These cables are galvanized steel with a strong vinyl coating for protection and hooks that are forged steel for optimal strength. You can get them in…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I do have a potential option for you, however the Draw-Tite Front Mount Trailer Hitch #65076 is not confirmed to fit the 2023 Ford F-550. Since there is no custom fit option, your best option is going to be with a universal model like the Draw-Tite…

view full answer...

Answer 10

Hi Tad, Based on the dimensions you provided I recommend going with the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide #C13702. This would mount under the frame with the receiver tube sitting roughly 2" below the…

view full answer...

Answer 11

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 12

We do have a front mounted receiver option that would work for your truck, but the Draw-Tite #65078 isn't a good fit for the Denali trim. The Denali front clip is different than the other trim levels, and in order to install the hitch major…

view full answer...

Where are Roadmaster 64 Inch Safety Cables Measured From?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching