Compatibility of Curt Hitch # C14006 on 2016 Chevy 1500 with Service Body

Question

Question:

We just purchased a 2016 Chevy 1500 with a Knapheide EC-Series service body. I need to get a hitch on there and just want to make sure everything will fit correctly. Do you have dimensions on item #C14006? I could measure it up if I need to. Or if you know it waont be a problem, even better! Thank you for your help!

asked by: Tony M

0

Expert Reply:

The Curt Trailer Hitch Receiver - Class IV # C14006 is a confirmed fit for your 2016 Chevy 1500 frame. The Service Body shouldn't change the hitch mounting locations unless it has a mount in that area for some reason. I have attached photos of the dimensions to assist and have also attached a video of the installation on a factory body model to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

Hey Chris, The Curt Trailer Hitch Receiver #C14006 has a 7" drop from the mounting bracket down to the top of the receiver tube.

view full answer...

Answer 2

Hi Jacob, The Curt Trailer Hitch Receiver #14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to…

view full answer...

Answer 3

Most bumper mount hitches (the hole in the bumper) a sized to accommodate a standard trailer ball and have a low weight capacity like 1,000lbs and 100lbs tongue weight. This is usually good for a light trailer or seadoo. If it is able to tow your…

view full answer...

Answer 4

I do have a possible solution for you but Curt trailer hitch #C15320 will not work on your 2005 Chevy Express with the Stahl body because it is only a couple of inches from where it mounts to the bottom of the frame to the cross tube and hitch…

view full answer...

Answer 5

I went out into our warehouse and measured both the Curt Hitches you referenced #C15312 and #C15313. THe #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches.

view full answer...

Answer 6

Center hole to center hole, the distance apart for all three holes measured from the holes on one flange across to the other is 43-5/8 inches. The flanges measure 41-1/8 apart, measured inside to inside and the 3 holes along each flange are 3-1/2…

view full answer...

Answer 7

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

view full answer...

Answer 8

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

view full answer...

Answer 9

The bolt holes on the Curt Trailer Hitch Receiver #C15302 sit across from each other 39" on center and are separated front to back by 7-1/2" on center. This is a custom fit for the following vehicles: 2008 - 2010 GMC Sierra 2500 -…

view full answer...

Answer 10

Yes, the Curt hitch part #C15312 that you referenced does fit your 2007 GMC Sierra Classic dually that has frame dimension of 42 inches from outside to outside on your truck frame.

view full answer...

Answer 11

The towing and tongue weight capacity of the Curt Ball Mount #C45338 does not change if you use it in the rise position; it has a tongue weight capacity of 1,000 lbs and towing capacity of 10,000 lbs no matter if you use it to get 8-1/4 inches of…

view full answer...

Answer 12

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across…

view full answer...

Compatibility of Curt Hitch # C14006 on 2016 Chevy 1500 with Service Body

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching