Can the Dual USB Charging Station # DG61031VP Withstand Heat

Question

Question:

Thanks Jon. Is this unit available in black?

asked by: David

0

Expert Reply:

The Dual USB Charging Station # DG61031VP is thermally protected which helps prevent it from becoming damaged due to excessive heat. It is always good practice to try to keep from leaving accessories plugged in and left when it is really hot outside.

expert reply by: Jon G

0

David

6/15/2018

Thanks Jon. Is this unit available in black?

Reply

Jon G.

6/15/2018

This unit is available in black with part # DG61030VP.

Reply

Answer 1

The USB ports can handle 2.1 amps each while the 12V Outlet on the Charging Station #DG61023VP can handle 10 - 20 amps. This station is also available in White #DG61024VP and Ivory #DG61025VP.

view full answer...

Answer 2

You can definitely wire the ports of the Diamond 12V Charging Station #DG61023VP in parallel. However, you will want to make sure the source you are using can handle the draw without tripping a circuit breaker. If it can, you are good to go. If it…

view full answer...

Answer 3

The minimum mounting depth needed to install the Decor Dual USB Charging Station #DG61030VP is 1/4-inch behind the mounting surface. I measured this item in our warehouse to confirm. Please refer to the included photo.

view full answer...

Answer 4

Based on the information I could find on your 2022 Forest River Wildwood FSX 179DBK travel trailer it has a 4,400lb axle. This will use the following components for the hub since we do not have these in a specific kit. Inner Bearing #L68149 Outer…

view full answer...

Answer 5

Unless there is a battery isolator like the Buyers Products #3376391050 on your trailer and it is set to off then your interior lights should pull power from your breakaway battery. The only other thing that may be preventing this is if your…

view full answer...

Answer 6

The Charging Station for RVs - 2 USB Ports - Black #DG61030VP does not have a power indicator light. The USB charging ports are part of the unit that mounts to the wall and there is a snap on bracket. We do not offer a USB charging port for your RV…

view full answer...

Answer 7

For your Sprinter 2500, I recommend the Curt Trailer Hitch Receiver #13358 that will do a great job for your bike carrier and more should you decide to tow later. This hitch model is designed for either the 144" or 170" wheelbase…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can the Dual USB Charging Station # DG61031VP Withstand Heat

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching