How Tall are the SumoSprings Solo Custom Helper Springs SSR-211-54

Question

Question:

hi how tall are these springs?

asked by: JOHN R

0

Expert Reply:

I spoke with my contact at SuperSprings regarding SumoSpring kit # SSR-211-54. The springs themselves are 5 inches tall. The whole assembly when put together and installed is 6-1/4 inches tall.

expert reply by: Michael H

0

Answer 1

You definitely can cut the SumoSprings Trailer Helper Springs #TSS-107-40 to fit your application if you don't have enough room. We have confirmed this with SuperSprings on multiple occasions. You might also want to make sure that you…

view full answer...

Answer 2

I recommend the SumoSprings Solo Custom Helper Springs part #SSR-117-47 instead of part #SSR-117-40 for your 2019 Ford F-150. In regards to the SumoSprings, you will always want to have a safety margin and the above will be perfect for your setup.…

view full answer...

Answer 3

The RV hitch we recommend the most for applications like your 2020 Jayco Jay Feather 27RL is the Curt #13703 as it fits the widest frame width range of 22 to 72 inches, fits all frame styles, and also can weld or bolt on. It has a 350 lb tongue…

view full answer...

Answer 4

The picture you attached is not of the Replacement Air Distribution Box w/ Built-in Thermostat for Furrion Chill RV Air Conditioner #FACT11MA-PS actually installed so that is why you can see the wiring. I attached a picture that shows a wiring…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

view full answer...

Answer 12

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

How Tall are the SumoSprings Solo Custom Helper Springs SSR-211-54

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching