Replacement Trim Rings for Under-Bed Rail and Installation Kit on 2015 GMC Denali

Question

Question:

Replacement Trim Ring I installed this kit about 3 years ago, and love it. How can I get 4 replacement Trim Rings?

asked by: Kevin B

0

Expert Reply:

Thank you for the photo and we do have replacement trim rings for the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP30868 in your 2015 GMC Denali. For those you need the Replacement Trim Rings for Reese Elite Series 5th Wheel Rail Kit # RP58458.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, for an adapter to allow an older Signature Series Reese hitch to fit the Ford Hitch Prep package you would need the #RP58419.

view full answer...

Answer 2

I contacted our representative at Draw-Tite about replacement trim rings for your Reese 18K Elite Series on your 2008 Chevrolet 2500. For a full set of 4 trim rings, you will need Replacement Trim Rings, part #RP58458. For just one ring and…

view full answer...

Answer 3

We do have replacement parts for the Reese Fifth Wheel Installation Kit, #RP30073. The replacement puck is the Draw-Tite Replacement Signature Series Puck Service Kit, #58253, and it is the puck, trim ring, bolt and lock washer. The puck plug cover…

view full answer...

Answer 4

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 (RVK3500) is the complete 5th wheel hitch that will mount to an existing B&W Turnoverball Gooseneck Hitch socket in the truck bed. The part #BWRVB3500 (RVB3500) that you also referenced is…

view full answer...

Answer 5

I did contact B&W on your behalf. If by side panel you are referring to the side panels of the upright arms that hold the head of the hitch in place, we do sell the Replacement Base #BWRVB3200 for the B&W Patriot 5th Wheel Trailer Hitch…

view full answer...

Answer 6

I spoke with my contact at Reese and he said that you would need to get the whole kit, #58238, if you need to replace any of the anchors on the hitch. The single ones are no longer being provided by themselves.

view full answer...

Answer 7

Since you purchased a Reese 18K hitch for Ford Factory pucks the foot #58238 is what you need for the older style Signature series fifth wheel hitches and is a replacement foot assembly kit. If you have the newer style, then #RP58419 is what you need…

view full answer...

Answer 8

The part #58238 that you referenced is for the older style Signature series fifth wheel hitches and is a replacement foot assembly kit. Whereas the part #RP58419 is for adapting a Signature series hitch to fit the newer Elite style rails.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Replacement Trim Rings for Under-Bed Rail and Installation Kit on 2015 GMC Denali

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching