Replacement Hinge for Extang Trifecta Tonneau Cover on 2011 Ford F-150

Question

Question:

Need to replace the hinges for my trifecta cover for my 2011 ford f150 side hinges which part should I get

asked by: Bridget G

0

Expert Reply:

The Replacement Hinge for Extang Trifecta and eMAX Soft Tonneau Covers - Cab Side - Qty 1 # EX1032 is the correct part for your 2011 Ford F-150 with Trifecta Cover.

expert reply by: Jason S

0

Answer 1

Yes, the Replacement Corners with Pads #EX4211 can also fit the Lund Genesis trifold tonneau covers. To ensure that this is the correct part for your cover you can check your owners manual with the parts breakdown. You should see part 4211 as a…

view full answer...

Answer 2

You would want the whole hinge assembly, #EX1033, especially if you have frequent breakage like you have described. There could be fatigue to the other components so to ensure maximum longevity I do recommend the whole hinge assembly. It is possible…

view full answer...

Answer 3

The Extang #EX1032 replacement hinge that you referenced is made for Extang Trifecta and Extang eMAX folding tonneau covers as a hinge replacement. I reached out to my contact at Extang and found out that they also make the Gator covers and that this…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

We do have that part for you! The correct part is the Replacement Tailgate Hinge for Extang Trifecta and eMax Tonneau Covers #EX1033. This is the same part as Extang's 35440400 that you reference.

view full answer...

Answer 8

As you have a Solera Edge awning on your 2022 Forest River Cherokee you will have to replace the entire awning to be able to use a Solera Screen Room #LC362218 or Solera Family Room #LC362230. The arms you have are specific to the Edge awning so you…

view full answer...

Answer 9

We don't offer the Gator branded tonneau covers, and parts like these aren't typically tested for compatibility across brands. With that said, I've included a diagram that gives the measurements of the #EX1033 hinge so that maybe…

view full answer...

Answer 10

Hey Gary, for your Extang Trifecta tonneau cover the correct replacement hinge would be the part #EX1032 that you referenced.

view full answer...

Answer 11

The Replacement Tarp #EX92405-20 is for a Extang Trifecta 2.0 Soft Tonneau Cover #EX92405 that fits a 2009 - 2014 Ford F-150 5-1/2 Foot Bed. To properly identify the correct replacement cover you will need to locate the part number on the tonneau.…

view full answer...

Replacement Hinge for Extang Trifecta Tonneau Cover on 2011 Ford F-150

Product Page this Question was Asked From

Continue Researching