Replacement Corners With Pads For Lund Genesis Trifold Truck Tonneau Covers

Question

Question:

Does part fit a Lund genesis trifold cover?

asked by: Carlos

1

Helpful Expert Reply:

Yes, the Replacement Corners with Pads # EX4211 can also fit the Lund Genesis trifold tonneau covers.

To ensure that this is the correct part for your cover you can check your owners manual with the parts breakdown. You should see part 4211 as a replacement part for your cover.

If you do not have your manual I can check the fit if you can tell me what number cover you have or I can attempt to do a search with the vehicle information you have it on.

expert reply by: Bud M

1

Answer 1

I checked with Extang and you were on the money, the Replacement Corner Brace Assembly w/ Hardware #EX1041 does in fact fit the Extang FullTilt SL Soft Tonneau Cover #EX38940 that you have on your 2004 Chevy Silverado. I have added a link to a…

view full answer...

Answer 2

The Replacement Hinge for Extang Trifecta and eMAX Soft Tonneau Covers - Cab Side - Qty 1 #EX1032 is the correct part for your 2011 Ford F-150 with Trifecta Cover.

view full answer...

Answer 3

For your TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX567101 (NLA) on your 2014 Ford F-150, the correct end caps are the Replacement Front Header End Plugs for TruXedo LoPro Tonneau Covers #TX1117540 that you mention.

view full answer...

Answer 4

There is one hitch available for your 2023 Mercedes GLE with the AMG package. That is the Stealth Hitches Hidden Rack Receiver #SH57GR. This includes the #SH49MR hitch along with the #SH62MR towing kit which has the wiring and ball mount required for…

view full answer...

Answer 5

The correct Replacement Tail Panel Assembly for a 2015 Chevrolet Silverado 1500 with the Extang Solid Fold 2.0 Hard Tonneau Cover (5-1/2' Bed) is part #EX83445-62. If you have the Extang Solid Fold 2.0 Hard Tonneau Cover 83450 (6-1/2' Bed)…

view full answer...

Answer 6

I checked with Extang to try and get more instructions on how the corner pieces of the Trifecta are held together and this is what they sent me: The corner pieces of the trifecta are held together, then the inside corner brace assembly is screwed in.…

view full answer...

Answer 7

The Replacement Tail Hinge #EX83450-64 fits on the Replacement Tail Panel Assembly #EX83450-62 and Replacement Center Panel Assembly #EX83450-61. There is not a metal rod that holds these together. The Replacement Tail Hinge Cap Kit #EX35830020 is…

view full answer...

Answer 8

The WeatherTech Mud Flaps #WT110044-120044 referenced in your question are confirmed to fit your 2018 Ford F-150 that has the wheel lip moulding. I was able to track down the rear installation instructions that are specific to the wheel lip moulding…

view full answer...

Answer 9

The tail panel you need is #EX83450-62. This is for the 83450 for your 2015 Chevrolet Silverado 1500.

view full answer...

Answer 10

In order to get the front header plug for the TruXedo TruXport cover on your 2009 Ford F-250 you will need the Replacement Cab End Corner and Weather Seal Kit for TruXedo TruXport Tonneau Covers #TX1118262. TruXedo does not offer the single plug as a…

view full answer...

Answer 11

I reached out to my contact at Extang and the front corner raising is a sign of the clamps not being installed correctly. He said you will want to remove the front clamp by removing the knob and then rotating the body up until the thread shows only…

view full answer...

Answer 12

After the install of your RoadActive Suspension System part #RAS54FR you will need to re-set up your weight distribution system. This is the case anytime you add suspension enhancement to a vehicle that was using weight distribution system.

view full answer...

Replacement Corners With Pads For Lund Genesis Trifold Truck Tonneau Covers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching