Trailer Fender Recommendation for 1990 Shorelandr Trailer
Question:
I have a 1990 shorelandr trailer model R2450T. It is a tandem axle trailer. I need new fenders for this trailer and cannot find then anywhere. The original part # for this fender was S-3130 and S-3129. They are 2 pc fenders and fit front right or rear left and front left or rear right. Do you have anything like this? They look like the picture below but are white Thank you
asked by: Andy
Expert Reply:
The Fulton Single Axle Trailer Fenders with Top and Side Steps - White Plastic, # F008574-2, are a pair of fenders that are designed for a single axle trailer with 14 inch wheel. These are very close to the fenders you submitted a picture of as well.
The overall dimensions of the fenders is 9-5/8 inches wide x 42-5/8 inches long x 12-3/4 inches tall. The top step measures 8 inches wide.
We do not have any reference for replacement parts for the Shoreland'r trailer. If the measurements of these fenders matches your current fenders, then these Fulton fenders will work well on your trailer.
Product Page this Question was Asked From
Fulton Single Axle Trailer Fenders with Top and Side Steps - White Plastic - 14" Wheels - Qty 2
- Trailer Fenders
- Top and Side Step
- 14 Inch Wheels
- 9 Inch Wide
- 42-5/8 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- White
- Fulton
more information >
Continue Researching
- Shop: Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15"
- Shop: Fulton Single Axle Trailer Fenders with Top and Side Steps - White Plastic - 14" Wheels - Qty 2
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - White Plastic - 13" Wheels - Qty 1
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Q&A: Replacement White Fender for a 2000 Shorlandr Profile
- Q&A: Replacement Fender Options for Shorelandr SLB23LW Boat Trailer
- Q&A: Replacement Single Axle Trailer Fenders That Measure 42" Long With 30-1/2" Between Mounting Brackets
- Q&A: Dimension of Mounting Hole on Redline Trailer Fender # PF11X35W
- Q&A: Trailer Fender Recommendation for a Trailer that Has Mounting Slots that are 27-1/2 inches Apart
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: fender
- Shop: Trailer Hitch
- Search Results: axle
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: trailer fenders
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: fenders
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Fenders
