How to Pick Out Over Under Kit For Trailer to Gain Ground Clearance

Question:

Hello, I own a 2002 Coleman Bayside that I would like to raise with a Dexter springs over axle flip. What model # would be right for this camper?

asked by: Scott R

Expert Reply:

We can help you pick out the correct axle over-under kit, but we don't know for sure what you'd need. You'll need to measure the diameter of your axles to be certain.

If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C