Availability For Parts For RBW Xtender X-16 5th Wheel Hitch

Question

Question:

When did RBW go out of business. I have a X-16 Xtender slider that I need parts for.

asked by: Victor S

0

Expert Reply:

RBW went out of business quite a few years back. Some customers have a hitch that they want to add to another or a new vehicle.

At etrailer.com, we have what you need to help install your hitch in your truck, such as # RP30035, but we don't have RBW parts for the hitch itself.

expert reply by: Timothy G

0

Answer 1

To add a set of 5th wheel rails to your 2023 Ford F-250, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. These custom fit brackets mount to existing holes in your Ford's frame. They fit both the 6-3/4' and…

view full answer...

Answer 2

The RBW X-16 5th wheel hitch is compatible with industry standard bed rails that are included with hitch install kits from Curt, Reese, Draw-Tite, Valley, Husky, Demco and B&W, among others. I'd recommend the Custom 5th wheel bracket/rail kit…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 8

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 11

For an above bed rail kit that fits your 2017 Ford F-250 you can use the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2402. These are industry standard rails (ISR) that are compatible with B&W Patriot, Curt,…

view full answer...

Answer 12

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Availability For Parts For RBW Xtender X-16 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching