Will Curt Adjustable Trailer Hitch Receiver Fit 2010 Sierra Which Jacks

Question

Question:

I have manual jacks on the rear. Will this hitch interfere with the jacks?

asked by: Ron V

0

Expert Reply:

Curt Adjustable Trailer Hitch Receiver # C13701 fits frames from 18 to 51 inches apart and needs a place on the frame to mount to. As long as the jacks aren't in the way and there's a place to mount the hitch, it will be fine.

expert reply by: Timothy G

0

click to enlarge

Answer 1

I attached a picture of the side brackets of the Curt hitch part #C13701 for you to check out. I am not totally sure what dimension you are looking for but if you don't see what you need in the attached pictures let me know and I'll…

view full answer...

Answer 2

Most likely you would be fine since it looks like you have a solid square bumper that is welded to your trailer frame, but you really would need to contact the trailer manufacturer to determine if your trailer is rated for towing and what…

view full answer...

Answer 3

I spoke to my contact at Curt to get the measurements you requested. He said that from the top of the cross tube to the top of the mounting plate the Curt hitch #C13701 measures 1-1/2 inches. The overall height of the side bracket is 5-1/2 inches.…

view full answer...

Answer 4

We do offer frame-mount trailer hitches for RVs and these are available in either bolt-on or weld-on varieties. You can click on the included link to see all such items, such as the Curt #C13701 that carries a 500-lb tongue weight (TW) rating and a…

view full answer...

Answer 5

I went out to our warehouse to take some measurements on the Curt Adjustable Trailer Hitch Receiver #C13701 that you referenced. The crosstube on the hitch is 2-1/2 inches x 2-1/2 inches. The bolt holes on the mounting brackets are spaced apart 8-5/8…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

The 7-Way blade style trailer connector is the most common 7-Way in use at this time. It would be beneficial to switch to this style. However, if you already have a 7-Way round connector you can just use an adapter to go to a 7-Way blade style when…

view full answer...

Answer 8

Welding is not required for installation of the Multi-Fit Motorhome Trailer Hitch, item #5350. Once you have the tube cut to length, be sure it is centered on the vehicle, you will need to drill 1/2 inch holes in the cross tube to secure it to the…

view full answer...

Answer 9

I reached out to my contact at Draw-Tite and for the 2005 Ford E-450 there isn't a custom fit hitch available. There is also not a Class IV or Class V hitch available from any of our manufacturers for your chassis. The largest hitch I can…

view full answer...

Answer 10

I do have an option for you but they don't offer custom fit hitches for motorhome chassis. The best option is a universal fit hitch which are typically only available in class III weight rating ranges. For this, I recommend the Multi-Fit…

view full answer...

Answer 11

The sliding side brackets for the Curt Adjustable Width Trailer Hitch Receiver #13703 are 1/4-inch thick steel. The brackets have a black powder-coated finish to resist corrosion. This hitch offers a tongue weight rating of up to 350-lbs and up to…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will Curt Adjustable Trailer Hitch Receiver Fit 2010 Sierra Which Jacks

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching