Replacement Rotor Hub Needed for a 2004 Four Winns Trailer
Question:
Hello, I am looking for a replacement rotor hub for my 2004 tandem axel four winns trailer. i need the the total assembly including inner and outer bearings, seals, and other parts. this is the brake axel. i am not sure of the bearing serial number. can you help? thank you for your time.
asked by: Dustin K
Helpful Expert Reply:
I do have a way to help you get the correct replacement rotor hub for your 2004 Four Winns trailer, but unfortunately we do not have a list of parts on trailers. Usually we can help you get the correct replacement parts based off of the weight capacity of your axle, but to ensure that everything is correct it is best that you know what bearings and seal that you need.
To get the correct replacement rotor hub you first need to pull your hub and check for part numbers on your inner and outer bearings as well as your grease seal. If you cannot locate the part numbers you can simply measure the B, C, and D locations on your spindle (see attached photo) with a digital caliper to the 3rd decimal (like 2.565).
If you have 3,500 lb axles then I recommend the Kodiak # KHR10D 10" hub and rotor with a Dacromet finish. This has a 5 on 4-1/2" bolt pattern and uses a # L68149 inner bearing and a # L44649 outer bearing while the grease seal has an inner diameter of 1.719".
If you have 5,200 lb axles Then you will want the Kodiak # KHR12D 12" hub and rotor with the Dacromet finish instead. This has a 6 on 5-1/2" bolt pattern and uses the inner bearing # 25580, outer bearing # 15123, and has a grease seal with an inner diameter of 2.25".
The Dacromet finish on these hub and rotor units is a superior coating for fresh and saltwater applications when compared to other coatings.
Let me know the weight capacity of your axles and/or the bearings and seal that you need and I can assist you further from there if they are different from what I just referenced.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KHR12D Review
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: kodiak 225 brake pads
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Search Results: 15123 bearing
- Search Results: 1 tang washer
- Q&A: Replacement Boat Trailer Hubs for #82655
- Shop: Suspension Enhancement
- Search Results: kod59fr
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Video: Kodiak Brake Pads Review and Installation
- Q&A: Replacement Zerk Fitting Recommendation for Dexter EZ Lube Spindle
- Q&A: Difference Between Kodiak Hub/Rotor Kit and Just Rotor Kit
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: kodiak 225 caliper
- Video: Review of etrailer by AxleTek Trailer Axles - 3,500 lbs 95 Inch Long Trailer Axle - e83GR
- Shop: Base Plate for Tow Bar
- Search Results: rotor hub 12 dac
- Search Results: l68149
- Article: Most Popular Wheel Bearings
- Video: Review of Kodiak Trailer Brakes - 12 Inch Hub/Rotor - 6 on 5-1/2 - Dacromet Disc Brakes - KOD69FR
- Video: Kodiak Trailer Brakes - Disc Brakes - K2HR526D Review