Does Pollak 7-Way to RV Socket LED Circuit Tester Work With 2016 Ram Factory Brake Controller?

Question

Question:

Truck 2016 dodge 2500 factory installed brake controller.

asked by: Jim

1

Helpful Expert Reply:

There are no compatibility isseus with use of the Pollak 7-Way to RV Socket LED Circuit Tester # PK12741 so it will work just fine on your 2016 Ram 2500. I've included links to a pair of video reviews of this tester for you to check out as well.

expert reply by: Kyle S

1

Answer 1

In regards to the Pollak 7-Way to RV Socket LED Circuit Tester part #PK12741, the brake controller may or may not read connected. This will vary from controller to controller but you should still be able to apply the override and see the light…

view full answer...

Answer 2

Yes. The Tekonsha 7-Way, RV-Style Tester for Brake Controllers - LED Test Lights #6562 will plug into a 7 way trailer plug on your 2015 Toyota Highlander and allow you to test the function of a Redarc Tow Pro Liberty #RED24FR without any issues.

view full answer...

Answer 3

To use the Pollak 7-Way tester part #PK12741 that you have to test the brake controller of your vehicle will require a buddy to press the brake pedal of your truck to see if the voltage from the brake controller makes it to the tester and lights up…

view full answer...

Answer 4

The Pollak circuit tester #PK12741 will tell you which functions are working in a 7-Way trailer connector but it doesn't tell you the location of the functions within the connector. But I can tell you that. If you are looking at the face of a…

view full answer...

Answer 5

Sounds like you just need a tester for your Jeep's 7-way, and there is one option I recommend above the rest, which is from Pollak: - Pollak 7-Way to RV Socket LED Circuit Tester #PK12741 I really like this tester because it is so simple to use;…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 10

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...