How to Find Brake Switch Circuit for 2011 Ford Crown Victoria for Brake Controller Install
Question:
color wire for brake controller
asked by: David R
0
Expert Reply:
I wish I could tell you which specific wire color you'd need to find on your 2011 Ford Crown Victoria but we haven't had the chance to install a brake controller on it so what you'll need to do is use a circuit tester like part # PTW2993 to test all of the wires that lead to the brake switch till you find the circuit that only has voltage when the brakes are applied. That's what you'll use to connect to the red wire of your brake controller.
I attached a help article on installing brake controllers from scratch for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements