EZ Flush RV Sewer Hose Compressed Length

Question

Question:

how much will it compress? 20foot to ?

asked by: Howard

0

Expert Reply:

When fully collapsed the EZ Flush RV Sewer Hose # D04-0054 that you referenced is 57 inches in length. When fully extended it's 20 feet.

We have this is a few colors.
Slate blue # D04-0143
Bronze # D04-0087
Blue # D04-0042
Silver # D04-0054

expert reply by: Jameson C

0

Answer 1

it depends on the fitting. On some, such as #CAM39144, the tube tapers down at the end so it is more narrow. Then you would sort of twist the hose back and forth while pushing it on. Once on far enough you would secure it using a clamp or, this the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

Your fresh water hose is an easy recommendation, I suggest the Camco RV drinking water hose, 5/8" diameter at 75' Long, #CAM22803. This is a reinforced PVC hose for drinking water made of FDA-approved materials and BPA-free. Because you…

view full answer...

Answer 8

To give yourself 40 feet total of sewer hose you would need two of the #CAM39611 which are 20 feet long and then to connect them you would need the coupler part #CAM39203. For a 4 in 1 adapter to use on the hose you would need the part #CAM34971 as…

view full answer...

Answer 9

The majority of sewer hoses won't fit inside a standard 4" RV rear bumper because the molded-on ends which contains the lug and bayonet fittings are too large. However, if you were to go with an option that doesn't have the molded-on…

view full answer...

Answer 10

The HTS Super Heavy Duty RV Sewer Hose w/ Built-In Clamps #CAM39901 can work with any standard sewer hose fittings with the exception of the red "E-Z Coupler" fittings. Camco specifically you could use adapters like Valterra Adapter…

view full answer...

Answer 11

To fit the hose in the bumper you will have to take the orange collars off the ends of the RhinoFLEX hose. There should be side storage on your trailer that you can store these and other items in allow the hose by itself to fit as intended. This is…

view full answer...

Answer 12

We have just what you need to install a 7-way in the bed of your truck. The Hopkins 5th Wheel 7-Way kit part #41157 would be exactly what you'd need. It plugs inline with the 7-way at the rear of your truck so that you can then install a second…

view full answer...

EZ Flush RV Sewer Hose Compressed Length

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching