How Much Does B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 Weigh

Question

Question:

I was wondering if you could tell me how much the hitch, ball and various parts weigh? I am trying to keep as light as possible as my setup is quickly approaching the GCVWR for my truck. Thank you for your time. I have a 2006 Ford F350 4x4 DRW with 4:10 gears. This is for BWGNRK1108.

asked by: Phil J

0

Expert Reply:

All of the parts combined for B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 weigh about 90 pounds. The only part that can be removed once installed is the ball. The ball itself weighs about 9 pounds. I have linked a video showing an example installation for you.

expert reply by: Michael H

0

Answer 1

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I went ahead and checked with Curt and and the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch #C60722 is the correct fit for a gooseneck on your 2001 Ford F-150. Having said that, your truck does need to have the holes in the side rails,…

view full answer...

Answer 7

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If…

view full answer...

Answer 8

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item #BW83FR and item #BW73FR are identical kits that both fit the 2023 Ford F-350 with either the 6-3/4' or 8' bed lengths. It looks like item #BW83FR was…

view full answer...

Answer 9

I have attached a photo for you that shows what the factory prep package looks like. This package contains a set of five holes in your truck bed for use with 5th wheel and gooseneck accessories. If you did have this package then most likely you would…

view full answer...

Answer 10

The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…

view full answer...

Answer 11

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 12

Yes we do have a B and W Turnoverball gooseneck hitch that fits your 2024 Ford F-350 with the #BW73FR.

view full answer...

How Much Does B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching