Replacement Drum Brake Hub for 1968 Airstream Trailer
Question:
The bearing # is 25580 and the seal is 442109
asked by: Steve
Expert Reply:
I can help you get the correct replacement, but I need some information from you to ensure we get you the correct hub.
If you remove a hub and can give me the bearing number on the face of the inner and the outer bearing as well as the number on the seal, then I can get you the correct fit. The bearing numbers are etched into the face of each bearing as well as the metal ring on the seal.
If you don't have these, then you will need to use a digital caliper like # PTW80157 to measure the spindle of your axle at the bearing and seal locations. These measurements need to be precise, so I've attached a photo to assist.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Replacement Spring Kit for 10" and 12" Manual-Adjust Electric Trailer Brake Assemblies
- Q&A: Availability of 12 X 2 Brakes, Bearings and Seals for a 1968 Airstream Travel Trailer
- Shop: Replacement Driver's-Side Dexter Adjusting Screw
- Q&A: Would the Dexter Brake Assembly part # 23-459 fit a Henschen Dura Torque Axel
- Q&A: Recommended Disc Brake Kit for Airstream Tandem Axle Trailer
- Shop: Replacement Adjuster Spring for Non Free-Backing 12" x 2" Hydraulic Trailer Brakes - Qty 1
- Shop: Replacement Manual-Adjuster Spring for 10" and 12" Electric Trailer Brake Assemblies
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 68149
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 25580
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: dust caps
Steve
3/9/2018
The bearing # is 25580 and the seal is 442109