5th Wheel Install Kit Brackets Only for a 2015 Ford F-150 with 6-1/2 Foot Bed

Question

Question:

Will this fit my 2015 f150 6 1/2 bed? An does this come with all the hardware to install it. I have the rails and hitch already.

asked by: Tom

0

Expert Reply:

No, bracket kit # RP50026 doesn't fit the F-150; it fits certain years of the F-250/350/450. For your 2015 F-150 you will need # RP50087. The hardware is included. I have linked a video showing an example installation.

expert reply by: Michael H

0

Answer 1

The Reese Custom Quick-Install Kit, #RP50026-58, will not move the center of the fifth wheel hitch directly over the axle. It will actually place the hitch 2-15/16 inches in front of the center of the axle. If the 5 inches between the truck bed and…

view full answer...

Answer 2

If the rails you have are Reese brand rails yes the quick install bracket kit part #RP50026 will work well for you. But if they are not you'd need to order this kit with rails as part #RP50026-58 as we can't recommend mixing rail kit and…

view full answer...

Answer 3

If you are looking for the complete fifth wheel rail kit for your 2016 Ford F-250 short bed you would want the part #RP50026-58 which is a custom fit kit that would install much quicker and easier than universal rails. If you only needed the brackets…

view full answer...

Answer 4

The Reese Trail Boss 5th wheel hitch you mentioned would work just fine in your 2013 F250. You'll need the Reese Quick-Install custom brackets, part #RP50026 as well as the 10-bolt rail replacement hardware kit, part #RP58430, both of which will…

view full answer...

Answer 5

When using custom brackets #RP50026 with Reese 5th wheel rails you will measure 32-1/4 inches from the rear edge of the bed (not the tailgate) forward on your 2014 Ford F-250 short or long bed. This is where the back edge of the rear rail will be.…

view full answer...

Answer 6

In order to utilize an underbed mounting system on your 2005 Ford F-350 you will first need to obtain the Under-Bed Rail and Installation Kit for Reese Elite Series part #RP30073. Once you have this installed you are then going to need a few adapters…

view full answer...

Answer 7

It's unlikely that the rails that are coming with the Pullrite hitch will work with the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches #RP50026. I'd recommend just getting the full deal with the Reese Quick-Install…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

5th Wheel Install Kit Brackets Only for a 2015 Ford F-150 with 6-1/2 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching