Non-Locking Junior Stainless Steel Paddle Latch

Question

Question:

Does this latch come in non-locking?

asked by: Joe H

0

Expert Reply:

Unfortunately, there's not a stainless, non-locking version of this latch. However, there's a non-locking version of the "Junior" latch paddle available in steel as part # N1980.

expert reply by: Jacob W

0

Answer 1

There is an indention in the bracket over the latch on the "Junior" Non-Locking Steel Flush Door Latch #N1980 which keeps it from falling out. I have pointed this out in the attached photo.

view full answer...

Answer 2

The Locking Stainless Steel Flush Door Latch, #L1883, has a threaded hole on the inside part in which you could insert your own knob so that it can be easily opened from inside. Another option is basically the same door latch that comes with the knob…

view full answer...

Answer 3

If you instead went with the Junior Latch part #L1883 you could then use the knob part #4PLSP but there isn't a knob solution for the #N1980.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Non-Locking Junior Stainless Steel Paddle Latch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching