Will a 1Up USA Quick Rack Fit Draw-Tite Trailer Hitch 24942 on a 2018 Acura TLX

Question

Question:

Does anyone know if this hitch will work with a 1UP USA bike rack? Will be installing this on a 2018 Acura TLX Advance AWD. Thanks!

asked by: Brandon

0

Expert Reply:

The Draw-Tite trailer hitch # 24942 for your 2018 Acura TLX has a 1-1/4 inch receiver. This is a Class I hitch so a bike rack will need to be Class I rated. Looking at the 1Up Quick Rack they state it fits 1-1/4 inch and 2 inch receivers but they do not mention if the 1-1/4 includes both Class I and Class II hitches or just Class II.

expert reply by: Michael H

0

Answer 1

We confirmed with Curt that the hitch part #C92URthat you referenced is a confirmed fit for your 2017 Honda Civic hatchback. There is fascia trimming required as well as some bumper beam trimming as well. I attached an install video that shows this…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Even though it is not a fit for it, it is not impossible to install the #C92UR Trailer Hitch Receiver on a 2019 Honda Civic Si. However, in order to do this, you will need to remove the center mounted exhaust pipe. I have attached a few photos for…

view full answer...

Answer 4

Yes, we do have a trailer hitch receiver fit for your 2024 Honda Civic sedan. I went ahead and verified this fit with the manufacturer for you, and what you need is the following: - Curt Trailer Hitch Receiver #C92UR

view full answer...

Answer 5

The only trailer hitch fits available for your 2020 Acura TLX are the Class I hitches with the 1-1/4" receiver from Curt #C11535 and Draw-Tite #24942. I recommend going with the one from Draw-Tite because it has a hidden crosstube which gives…

view full answer...

Answer 6

INNO square crossbars and Thule square crossbars are the same dimensions, 7/8 inch by 1-1/4 inch. The part #INTR would then be compatible with Thule crossbars. To complete the rack for your 2015 Jeep Grand Cherokee you would also need the #INTR132.

view full answer...

Answer 7

While we don't have an install video (yet) for the Draw Tite hitch #DT68GR that fits your 2021 Acura TLX we do have a set of very detailed instructions that I linked on this page that have real pictures from the install that will walk you through…

view full answer...

Answer 8

Yes, the Draw-Tite #24942 is a confirmed fit for your 2019 Acura TLX. This is a Class I trailer hitch with a 1-1/4" receiver. It has a max tongue rating of 200 lbs and a max gross trailer weight rating of 2,000 lbs but you will want to verify…

view full answer...

Answer 9

There is a photo available showing what the Curt Trailer Hitch #C11535 will look like when installed on a 2016 Acura TLX, which is from the linked installation instructions for this hitch. The crosstube does show with the Curt hitch so if you were…

view full answer...

Answer 10

I know what you're talking about, I've done that a time or ten myself, and it hurts! At present (July 2020) the Curt #C11535 is the only confirmed fit offered for the 2020 TLX. The Draw-Tite #24942 isn't a confirmed fit for the 2020…

view full answer...

Answer 11

The straight-forward answer is no, you should never carry 3 bikes in a Class I hitch. Any trailer hitch manufacturer will confirm this. Even though it would seem like using a lighter bike rack like the Thule Helium Aero 3 #TH9043PRO would keep the…

view full answer...

Will a 1Up USA Quick Rack Fit Draw-Tite Trailer Hitch 24942 on a 2018 Acura TLX

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching