bing tracking image
Q & A Icon

Brake Controller and 7-Way Wiring Harness for a 2016 Ford Expedition  

Question:

Hello, I have a 2016 Ford Expedition EL 2X2 with a 4 flat trailer plug. I need to upgrade to be able to tow with trailer brakes. What productsTrailer brake controller, harnesses, new plug, etc. would I need? And is there DIY instructions for this?

0

Expert Reply:

For your 2016 Ford Expedition, I recommend adding the Tekonsha Prodigy P3 Trailer Brake Controller, part # 90195, the Tekonsha Ford Wiring Harness, part # 22292, plus the 7-way Upgrade Kit, part # ETBC7 to install a 7-way kit onto your vehicle.

The # ETBC7 will install using the factory 4-way and then connect into the existing wiring. The Tekonsha Prodigy P3 will then use an adapter cable included in its kit to plug into the port in the front of your vehicle, completing the system.

I've included a link to a video of the ETBC7 installation on a 2004 Ford Expedition. They talk briefly about additional relays, however it looks like the 2016 Expedition doesn't require these additional fuses. I recommend verifying this with your owner's manual prior to install.

Finally, I've added an installation of the Tekonsha P3 on a 2008 Ford Expedition, so you can get familiar with its process. Because of the existence of a factory port, the install is a snap and the primary difficulty is mounting the kit where you want it.

expert reply by:
0
Jacob W

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>