Anti-Sway Bar and Steering Stabilizer for 2012 Fleetwood Discovery 40X on Freightliner XC Chassis

Question

Question:

Looking for an Anti-Sway bar to fit a 2012 Fleetwood Discovery 40X. Thanks.

asked by: David R

0

Expert Reply:

The 2012 Fleetwood Discovery 40X motorhome is built on a Freightliner XC chassis and all suspension-related products for it are shown on the linked page. We offer both anti-sway bars and steering stabilizers.

For a steering stabilizer use Roadmaster Reflex Steering Stabilizer # RM-RBK18-RSSA.

To get the most improvement also use a front anti-sway bar, part # RM-1209-136.

expert reply by: Adam R

0

Answer 1

The Roadmaster Reflex Steering Stabilizer #RM-RBK18-RSSA will fit your 2014 Thor Palazzo that's built on a Freightliner XC Series chassis. As long as your RV has an air suspension and soild front axle.

view full answer...

Answer 2

For your 42 foot Phaeton motorhome on a 2013 Freightliner chassis, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK18-RSSA is a confirmed fit. I've attached a video with this application. It will…

view full answer...

Answer 3

The steering stabilizer you are looking for that is a confirmed fit with your RV is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK18-RSSA. This comes with the brackets and hardware needed for…

view full answer...

Answer 4

The stabilizers ( #RM36RR or #RM73RR ) I provided for the GVWR ratings are the only ones available for your Freightliner XC Chassis. The Exact center mounts to the leaf spring stack U-bolts and clamps onto the track bar using the bracket kit…

view full answer...

Answer 5

The nut on the Wheel Masters Tire Pressure Valve Extenders #WM80292 freely rotates to make installation and removal easier. If you check out the attached review video you can see this process being done.

view full answer...

Answer 6

The Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long item #WM80292 can be used in any application where a straight 2-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated…

view full answer...

Answer 7

The only sway bar we offer for you is the part #RM-RBK14-RSSA which is for vehicles with air suspension and a solid front axle. I attached an install video for you to check out as well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Anti-Sway Bar and Steering Stabilizer for 2012 Fleetwood Discovery 40X on Freightliner XC Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching