Which Trailer Hitch Receiver Will Have the Most Ground Clearance For 2011 Subaru Outback
Question:
I have a 2011 Outback and I am looking to purchase a hittch for this vehicle. I would like to know which of the hitches that you offer would provide the most hitch ground clearance when installed. Thank you.
asked by: Richard G
Expert Reply:
Each hitch is positioned to sit tucked up and close to the bumper as you can see on the product page pictures. All of the hitch receivers available for the 2011 Subaru Outback will sit in the same general position with ground clearance varying slightly from each hitch.
For example, from the ground to the top of the receiver on the Draw-Tite Trailer Hitch, part # 75673, measures 14-1/2 inches. So you would have approximately 12-1/2 inches from the ground to the bottom of the receiver, as it is a 2 inch receiver.
With the Curt Hitch # 13390, from the ground to the top of the receiver measures 14-1/8 inches which would give you slightly less ground clearance than the Hidden Hitch.
With a 1-1/4 inch hitch like the Draw-Tite # 36493, there will be slightly more ground clearance but you will have reduced weight capacity.
I would recommend going with a Class III, 2 inch receiver like the Draw-Tite Trailer Hitch, part # 75673. This is the highest capacity hitch available for your vehicle and with a 2 inch receiver there is a wider range of bike racks and other accessories that you will be able to use.
I have linked an FAQ on trailer hitch installation and an FAQ on towing components.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Best Trailer Hitch Recommendation for 2017 Subaru Outback Wagon for Bike Rack and Towing
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Do you Recommend the etrailer # e98847 or the Draw-Tite # 75673 for My 2018 Subaru Outback?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Does Draw Tite Hitch # 75673 Fit on 2018 Subaru Outback Wagon
- Q&A: Installing a 7-way Trailer Connector on a 2018 Subaru Outback
- Q&A: Hitch for 2011 Subaru Outback Wagon with Best Ground Clearance
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Trailer Hitch Installation Tips
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)