5 Lug Hub Recommendation for Timbren Axle Less Kit # ASR2000S02

Question

Question:

Which hub and bearings go with this unit ? I have combed your site and cant seem to find that info. I wish to use 5x4.5 wheels. thanks

asked by: Dennis L

1

Helpful Expert Reply:

For a hub with a 5 on 4-1/2 inch bolt patter that fits the Timbren Axle Less Kit part # ASR2000S02 we have the part # AKIHUB-545-35-EZ-K. These come pre greased to save a little time and energy.

expert reply by: Jameson C

1

Answer 1

Thanks for all of the information! The products you were looking at are all compatible. Starting with the Timbren Axle-Less Suspension I would go ahead and use the #A35RD545 as it has the 3500lb rating which will be perfect for your intended trailer…

view full answer...

Answer 2

The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Regular Tires - 2,000 lbs #ASR2KHDS05 are very popular, so we try to keep them available. The idler hubs I recommend that are compatible are the Trailer Idler Hub Assembly…

view full answer...

Answer 3

For an idler hub that fits the Timbren kit part #ASR2000S02 you would want the part #8-91-05UC1-EZ which comes with the needed bearings.

view full answer...

Answer 4

We've had this question sent into us before and when we spoke with Timbren they told us that the C-channel frame design will be fine assuming that he open part of the C is on the inboard side and not the outboard side of the frame. If the C…

view full answer...

Answer 5

As long as you can get the spindle height of the Timbren system part #ASR2000S01 to match your other axle you should be just fine to use it with a standard style axle. The center of this spindle will end up being 2-5/8 inches below the bottom of the…

view full answer...

Answer 6

The Dutton-Lainson Rigid Mount Marine Jack #DL22507 has an inner diameter of 1 3/4", has an inner post length of 19" and and outer post length of 21 1/4". I've also included the dimensional drawing as well for you to check out.

view full answer...

Answer 7

All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack #Y00409 and #Y00101 as well as the Rhino Rack roof rack part…

view full answer...

Answer 8

The Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Regular Tires - 2,000 lbs #ASR2000S02 is a suspension system integrated into a spindle that can use a 2 inch square bar to created an axle of whatever length needed. The…

view full answer...

Answer 9

I have a solution for you to add an awning that will work on your trailer with the Yakima roof rack, but because of the placement of that rear door and how high it raises above the roof, the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On -…

view full answer...

Answer 10

When using an idler hub or a hub and drum with brakes on the Timbren Axle-Less Trailer Suspension System, part #ASR2000S02, the difference in the distance from the bracket to the front face of the hub as shown in the attached drawing would be the…

view full answer...

Answer 11

In regards to the Timbren Axle-Less Trailer Suspension Systems, you'd have to go with the 2,200 lb model part #ASR1THDS01 in order to add brakes. For this, you'd need to use the Electric Trailer Brake Kit part #AKEBRK-35-SA and Trailer Hub…

view full answer...

Answer 12

The Timbren Axle-Less Trailer Suspension System #ASR2000S01 doesn't come with brake mounting flanges and although you can upgrade them at a later time, it would be more cost-effective in the long run to go with the system #ASR2000S02 instead…

view full answer...