Trailer Hitch Recommendation for 2018 Lexus IS 350

Question

Question:

I need a trailer hitch for a 2018 Lexus IS350, which should I get?

asked by: Les

0

Expert Reply:

For your 2018 Lexus IS 350 the Draw Tite hitch part # 24923 is a confirmed fit and would be the way to go. Unlike the Curt equivalent for your vehicle it does not require a stabilizer strap when carrying a bike rack so it's the best choice.

expert reply by: Jameson C

0

Answer 1

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

view full answer...

Answer 2

When you install an aftermarket part on your vehicle like the Draw Tite hitch #76021 in this case on your 2018 Jeep Renegade, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part…

view full answer...

Answer 3

To carry a bike rack on your 2012 Lexus RX 350 you will need to have a trailer hitch installed, and the best option for this is from Draw-Tite: - Curt Trailer Hitch Receiver #C12343 The reason the Draw-Tite #75676 is the best is because it has the…

view full answer...

Answer 4

Thanks for the picture! The Draw-Tite Trailer Hitch Receiver #75679 you were looking at will measure 12-3/4" from the ground to the top inside edge of the receiver when installed on your 2009 Ford Flex, so it will give you a little more…

view full answer...

Answer 5

The trailer hitch receiver that will offer the most ground clearance on your 2017 Jeep Renegade is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76021. This is a Class III hitch with a 2" receiver tube opening. When we installed…

view full answer...

Answer 6

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like…

view full answer...

Answer 7

EcoHitch won't allow us to link the installation instructions in our product descriptions, but I can certainly send you a .pdf copy in a separate email. The installation of the EcoHitch #EH83VR isn't too involved, but will require…

view full answer...

Answer 8

We actually had the opportunity to install the Draw-Tite Max-Frame Trailer Hitch Receiver #76021 on a 2018 Jeep Renegade Latitude and found from the ground to the top of the receiver tube is 10-1/4". Since this is a 2" receiver we…

view full answer...

Answer 9

The only available hitch receiver for a 2022 Toyota Avalon is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11576. It is a concealed cross-tube design and will drop below the rear bumper 2-1/4 inches.

view full answer...

Answer 10

The the Curt #C11389 is the only trailer hitch receiver we currently carry for your 2016 Lexus IS 200t. We don't have any pictures of it on your exact Lexus but I've attached a picture on a 2014 IS 250. The location and look will be very…

view full answer...

Answer 11

For your 2020 Toyota Avalon Hybrid I highly recommend the Curt Trailer Hitch Receiver #C11576, which is confirmed to fit your Hybrid model and features a nice hidden crosstube design that allows only the 1-1/4" receiver to be visible behind the…

view full answer...

Answer 12

With the Curt Trailer Hitch Receiver #C12142 installed on your 2017 Jeep Renegade Trailhawk you will have roughly 10-1/4" clearance. Since the ground clearance will be very similar to that of the Draw-Tite Trailer Hitch #76021 you had looked at…

view full answer...

Trailer Hitch Recommendation for 2018 Lexus IS 350

Continue Researching