Does Camco Brass Propane Tee CAM59125 Install Before or After Regulator

Question

Question:

where does this go in the propane chain? does it install after the regulator?

asked by: Jason

0

Expert Reply:

The Camco Brass Propane Tee # CAM59125 is meant to install in between your propane supply tank and your primary regulator. So, it installs before the regulator.

The included 5-foot supply hose allows you to quickly connect an auxiliary propane cylinder without having to disconnect anything.

The two linked articles I included for you will help you with the connectors used and how this product integrates within an RV propane system.

expert reply by: Adam R

0

Answer 1

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 2

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 3

Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.

view full answer...

Answer 4

Your Winntec 6020 regulator can easily be replaced by the Automatic Change Over RV Regulator from JR part #37207-30395 as the BTU rating of this is compatible and the fitting sizes are the exact same.

view full answer...

Answer 5

The Automatic Changeover RV LP Gas Regulator #37207-30395 will work in place of the winntec model 6020 with no issues at all. With pigtails I suggest the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 20" #100473-20-MBS.

view full answer...

Answer 6

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...

Answer 7

No you don't need to add an additional regulator when using the Camco Brass Propane Tee part #CAM59113 with a grill that has a built-in regulator. There will need to be a regulator on the line that runs to the RV but it sounds like you already…

view full answer...

Answer 8

There are some great solutions for hooking your barbecue grill up to the propane supply on your 2020 Winnebago Vista. My guess is that the hose you have has a male quick-disconnect to a 1 pound disposable cylinder fitting, similar to #100476-72-MBS.…

view full answer...

Answer 9

I have a solution but unfortunately the freeze sensor is not available for individual sale. You have to replace your controller that includes the freeze sensor. I have listed the options below for Furrion Air Conditioners. If you have the single zone…

view full answer...

Answer 10

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

view full answer...

Answer 11

The adapter you need to install on the 100 lb tank is the part #204128-MBS. This will thread onto the tank and give you the correct fitting for your ACME type 1 pigtail to connect to.

view full answer...

Answer 12

Since the Curt Carrier part C18152 that you referenced doesn't fold, I would recommend the etrailer brand folding carrier #e98874. This is also a 24 x 60 inch cargo carrier with a 500 lb capacity that folds and should work well for you for both…

view full answer...