The Camco Brass Propane Tee Allows Separate Supply Options for your RV Propane Needs

Question

Question:

Can a second supply tank and hose be connected to existing supply tank?

asked by: Jonny

0

Expert Reply:

The Camco Brass Propane Tee w/ 4 Ports and 5' Long Supply Hose # CAM59125 is designed to allow you to connect hoses to the assembly. The Tee allows you a male 1-20 to attach a hose. The 5 foot supply hose included lets you connect an auxiliary propane cylinder.

expert reply by: Jason S

0

Answer 1

The 4-port brass tee included in Camco Brass Propane Tee and Hose Kit #CAM59125 has one each of the following propane connectors: Female P.O.L. (connects to propane regulator) Excess flow soft nose P.O.L. (connects to propane supply) 1"-20 Male…

view full answer...

Answer 2

The brass tee part of the Camco Brass Propane Tee and 5-Foot Supply Hose #CAM59125 can be used with just the connections you need. If you refer to the linked photo of the tee you'll note that it coms with brass caps for both the top and side…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

You'll be able to connect your Weber Traveler Grill directly to that quick-disconnect fitting using a hose like the MB Sturgis #100476-120-MBS as long as your grill doesn't have a regulator. If it does have a regulator then you need a tee…

view full answer...

Answer 9

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 10

I really like the following etrailer kit for your 2018 Ford Focus Hatchback: - etrailer Invisible Base Plate Kit #e98960 - etrailer SD Non-Binding Tow Bar #e34ZR This system has removeable tabs for a clean look when you aren't towing, and then…

view full answer...

Answer 11

Michael, that part number didn't come back to anything but we do have a few replacement ladder options for you to check out. Depending on how tall you need the ladder to be, something like the Stromberg Carlson Exterior RV Ladder #LA-401BA could…

view full answer...