How to Remove End Caps on Rhino Rack ROC25 Roof Rack

Question

Question:

i have purchased a rhino vortex roof rack and I cannot figure how to remove the end caps when the key is inside the bar with ends already on without chance of damaging the plastic key can you help me ?

asked by: Rod

0

Expert Reply:

The end caps on the Rhino-Rack Roof Racks, such as part # RR35SR are removed by simply inserting the key and turning it counter clockwise. When turning the key, the caps should come right off the feet that are mounted to the vehicle's roof.

If you are still having some difficulty, please let me know and I will be happy to look into this further.

expert reply by: Chris R

0

Answer 1

The feet on Rhino-Rack roof rack #RR35SR have a cap that is held in place using a locking/latching mechanism. All you have to do is unlock it by turning the key counter clockwise and the caps can come of the feet. Reverse the process to put the cap…

view full answer...

Answer 2

I have included a link to the roof racks that are available for your 2015 Dodge Durango RT. One of my personal favorites is the Rhino-Rack Roof Rack, #RR35SR. This rack is aerodynamic, all black, and looks as though it was from the factory so it will…

view full answer...

Answer 3

If I had to pick a roof rack for a naked roof application, I would stick with Yakima or Thule. I have more confidence in their roof rack fits. My roof rack recommendation is the Yakima roof rack with round crossbars. It will consist of the following:…

view full answer...

Answer 4

We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part #Y00425 for the two 50" JetStream Crossbars in…

view full answer...

Answer 5

The only solution to reducing wind noise on a roof rack, like your Rhino-Rack Vortex Aero Crossbars 54" #RRVA137B-2, is to install a wind fairing / deflector. To determine which size to get, measure the usable crossbar space between the…

view full answer...

Answer 6

There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I…

view full answer...

Answer 7

I believe the piece on your Thule Atlantis 1600 XT (discontinued part 686XT back in 2012) is the part pointed out in the attached photo. If this is the case then unfortunately Thule doesn't have this available as a replacement part and if these…

view full answer...

Answer 8

Yes the Malone Profile 18s Cargo Box part #MPG10 does fit the factory crossbars of your 2018 Dodge Durango.

view full answer...

Answer 9

There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part #TH811XT and #Y04075. Both carriers have weight capacities…

view full answer...

Answer 10

Rhino Rack does have a roof rack that fits your 2017 Nissan Titan XD with a naked roof with the part numbers #RRVA150B-2, #RRRLKVA, #DK468. With these three part numbers you'd have everything you'd need to install a Rhino Rack roof rack.

view full answer...

How to Remove End Caps on Rhino Rack ROC25 Roof Rack

Continue Researching