Recommended Cargo Door Lock Keyed Alike

Question

Question:

I need 3 replacement cargo door locks keyed alike in the barrel key config. It should measure 1 3/8inch .

asked by: Ray

0

Expert Reply:

For your cargo doors, I recommend the Blaylock Door Lock for Enclosed Trailers - Aluminum - Push Button # BLDL-80 which can be keyed alike. This will have the barrel key you asked for. I've attached a video to assist. Its overall dimensions are 3" long x 6" wide x 9" tall. It will give you ability to utilize the standard 1-3/8 inch wide keeper.

expert reply by: Jason S

0

Answer 1

If all of your current locks are Blaylock locks, it may be possible. If they are a different brand, it is not possible to get them keyed alike. The Blaylock Door Lock for Enclosed Trailers part #BLDL-80 can be ordered keyed alike if you purchase…

view full answer...

Answer 2

To charge your enclosed car trailer battery and power your accessories you're going to need the Redarc In-Vehicle BCDC Battery Charger - Single Input - DC to DC - 12V/24V - 12 Amp item #RED96FR. You are also going to want the 23-Amp MIDI Fuse…

view full answer...

Answer 3

Typically people will let the breakaway battery run the breakaway system and then would use the accessory battery to power the interior lights etc. This tends to work the best since your breakaway battery needs to always be charged and interior…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the #BLDL-80 he would probably also find other ways (much…

view full answer...

Answer 7

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

view full answer...

Answer 8

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 9

When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until…

view full answer...

Answer 10

The Oil Cap Kit #RG04-250 is designed for standard 10K - 12K axles and has 3-3/4" diameter threads. This should do the trick for you but I do recommend measuring the diameter of your oil cap first as I wasn't able to find anything related to…

view full answer...

Answer 11

I spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack #6814 and topwind jack…

view full answer...