How is the 7 Way Plug on the Custer Wireless LED Tow Bar Light Wired

Question

Question:

Do you have a wiring diagram for the 7 pin plug?

asked by: Denny B

0

Expert Reply:

In order to use the Custer Wireless LED Light # LIW-LDTL-7B you just need a standard 7 way connector. I've attached a photo of what a standard 7 way plug is going to be wired like, as well as one of our helpful articles on wiring a 7 way plug that you might want to refer to as well.

expert reply by: Erik B

0

click to enlarge

Answer 1

The transmitter for the Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23" Long - 7-Way Round Item #LIW-LDTL-7B gets it's power through the 7 Pole plug on the back of the RV. When the RV has power at the plug and…

view full answer...

Answer 2

To avoid splicing into your 2021 Ford F-150's wiring I recommend the Demco Wireless LED Light Bar for Towed Vehicles #DM36MV. This will allow you to simply plug into your RV and suction cup/strap down the tow lights to your vehicle and go.…

view full answer...

Answer 3

The Custer Wireless LED Tow Bar Light part #LIW-LDTL-7B and Pilot Magnetic Tow Lights part #RM-2120 are both excellent options for magnetic tow dolly lights which are wireless so no wires between the vehicle and toad are needed. In regard to powering…

view full answer...

Answer 4

Typically a 4 Flat plug will not have a lead that goes to a battery as the White wire is the Ground, The Yellow is Left Turn/Brake, Green in Right Turn/Brake, and Brown is Running Lights. If you were using this for a different application, you can…

view full answer...

Answer 5

The most likely cause for the turn signals not to work when the running lights are on with your trailer is a bad or weak ground. It's very possible that a weak ground connection can be just strong enough to allow sufficient current for some…

view full answer...

Answer 6

If you need to convert a 3 wire system on a motorhome to a 2 wire system on a standard trailer or towed vehicle, then the Roadmaster Brite-Lite Wiring Converter #RM-732 is the correct fit and is compatible with LED lights. I've attached a diagram…

view full answer...

Answer 7

It sounds like you are saying that when the brakes are pressed in your tow vehicle, and the turn signal is on at the same time, that the brake light on the Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23" Long - 7-Way Round…

view full answer...

Answer 8

Yes, the Custer Wireless LED Tow Bar Light, #LIW-LDTL-7B will properly function with any towed vehicle that has a functional 7-way RV plug installed.

view full answer...

Answer 9

I have a great solution for you. Since you say that you are looking to flat-tow multiple vehicles, I strongly recommend the Blue Ox Patriot Portable Braking System #BLU37TR. This system is a much more reliable and higher-quality system than a Brake…

view full answer...

Answer 10

The 4-way round connector is very rare and the 6-way round is somewhat common but more rare than 4-way flats and 7-ways so what that means is that we don't have an adapter for your configuration but I have a similar solution. We have a version of…

view full answer...

Answer 11

No, wireless tow lights like the Custer Wireless LED Tow Bar Light #LIW-LDTL-7B will not interfere with the monitor of the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR. The Blue Ox Patriot Radio Frequency, Portable Braking System…

view full answer...

Answer 12

The Blue Ox Patriot #BLU37TR requires 12 volts to operate and uses a cigarette lighter style plug. So the Roadmaster 12 Volt Outlet Kit #RM-9332 would be perfect to power. The 12V kit is designed to hook directly to the battery of your towed vehicle,…

view full answer...

How is the 7 Way Plug on the Custer Wireless LED Tow Bar Light Wired

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching