Bike Rack Options for 2016 Mini Cooper Convertible

Question

Question:

Hello, Will this rack fit to my 2016 cooper convertible? Thank you.

asked by: Sergey L

0

Expert Reply:

The 2016 Mini Cooper convertible is not considered a fit for trunk-mount bike racks. There is no way to properly attach the carrier. Yakima, Hollywood Racks and Thule show no fits for your convertible vehicle for a trunk-mount bike rack; only the hard top model has trunk racks confirmed to work.

We DO offer hitch racks that could work. If your convertible is NOT the S Series or the John Cooper Works version you could install hitch # 306-X7290 and then use a lightweight 1-1/4-inch 2-bike rack like the inexpensive Kuat Beta # B202-114.

expert reply by: Adam R

0

Answer 1

There won't be any problems towing your 2016 Mini Clubman S on a tow dolly, even with its low ground clearance at the rear. The vehicle's rear axle and wheels are very far back, so it isn't going to tilt downwards enough to cause issues…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver #306-X7290 referenced in your question is confirmed to fit your 2015 Mini Cooper, as long as it has the single exhaust and it is not the S Series or John Cooper model. I spoke with my contact at EcoHitch and…

view full answer...

Answer 3

I have bike rack option with a loading ramp available for you, but the Inno Tire Hold 2 Bike Platform Rack, #INH120 does not have an add-on option for a loading ramp. I suggest the Thule EasyFold XT Bike Rack for 2 Electric Bikes, #TH903202. Like the…

view full answer...

Answer 4

We have solutions that will allow you to carry your 50 lb e-bike but none of the trunk mounted bike racks are rated for carrying more than a 35 lbs bike. So you'd need to have a hitch installed on your 2021 Mini Cooper Convertible like the…

view full answer...

Answer 5

Since none of the trunk mounted bike racks have the weight capacity for a 50 lb weight capacity you'd have to go with a hitch mounted option as they have higher weight capacities like the Thule EasyFold XT part #TH903202. You would need a hitch…

view full answer...

Answer 6

The Curt trailer hitch #C11417 is actually NOT a fit for a 2015 Mini with a spare tire. Instead you would need the EcoHitch #306-X7290 which does fit a Mini with a spare tire. While we have not test fit this hitch I did add a photo from the…

view full answer...

Answer 7

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

view full answer...

Answer 8

For plywood walls you would need wood screws to secure the E-track #E19148 to the walls. That is if you attach the track to only the wooden walls. If you secure any of the E-track to the metal support frames then you would need machine screws for the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...