How High Can the FasTen RV Leveling Blocks be Stacked

Question

Question:

What is the maximum height?

asked by: Lisa

0

Expert Reply:

The FasTen RV Leveling Blocks, part # CAM44512, should not be stacked higher than 4-1/2 inches.

expert reply by: Charles S

0

Answer 1

Yes! You certainly can use the FasTen RV Leveling Blocks #CAM44512 under stabilizer jacks. They are made to work with jacks, stabilizers, or trailer wheels. I have linked a video review of the blocks for you.

view full answer...

Answer 2

The Ultra-Fab Leveling Blocks individually measure 8-1/4" wide x 8-1/4" long each; they are available in different quantities: - Quantity of 4: Ultra-Fab Leveling Blocks #UF48-979050 - Quantity of 8: Ultra-Fab Leveling Blocks #UF48-979052 -…

view full answer...

Answer 3

I spoke to my contact at Lynx and he informed me that the part #77433 that you referenced can be stacked up to 5 blocks tall and since each block is 1 inch tall that would mean that you could get a max of 5 inches. The height you are looking for…

view full answer...

Answer 4

The Thule RV Wheel Levelers #TH307617 is going to have a width of 7-5/8th inches. Here are some more measurements. At the tallest point is about 5-3/4 inches tall. The tallest level is about 4-1/2 inches tall, next is about 3 inches tall and then…

view full answer...

Answer 5

Weight distribution spring bar tension can be increased by tilting the head toward the trailer so that the ends of the spring bars are closer to the ground. Once connected to the lift brackets this increased angle translates into more tension, which…

view full answer...

Answer 6

I confirmed with Camco that their FasTen RV Leveling Blocks #CAM44521 do not carry a maximum RV weight rating so they are compatible with virtually any RV or motorhome out there. This set is gray and the part #CAM44512 is yellow.

view full answer...

Answer 7

I would say that quality wise the Camco kit part #CAM44521 is the same as the Ultra Fab kit part #UF48-979052. Based on price alone I would go with the Camco if it were me. Unless you really like the color blue... You can also use them on your…

view full answer...

Answer 8

For your 2014 Mercedes Benz GL450 you'd need to use a set of universal mirrors since there aren't any custom ones made to fit your vehicle. For that we have the Dual View K-Source mirrors part #KS3990 which we have found fit really well, are…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How High Can the FasTen RV Leveling Blocks be Stacked

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching