Recommendation for Enclosed Trailer Ramp Springs for a 7 Foot by 14 Foot Enclosed Trailer
Question:
I have a haulmark 7 by 14 enclosed cargo trailer. The assist assembly is approx 76 inches wide. Do you have or suggest a product that fits that width? what is the distance between the mounting brackets on the 81 dual spring ramp assist assembly part ERS120D81 Thank You
asked by: John
Expert Reply:
The system that will probably work best for you is the Enclosed Trailer Ramp Spring - Dual, 81 Inches Wide, # ERS120D81. I went out to the warehouse and measured the distance between the mounting brackets. It is 64-1/2 inches from bolt hole center on one bracket to bolt hole center on the other bracket. The overall length is 81 inches.
Since you have a 7 foot (84 inch) wide trailer, the 81 inch assembly should be a good fit. The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Product Page this Question was Asked From
Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity
- Trailer Ramp Springs
- Dual Ramp Spring
- Conventional
- 120 lb Capacity
- 81 Inch Wide Spring
- 84 Inch Wide Doors
- Steel
- M-3 and Associates
more information >
Continue Researching
- Shop: Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity
- Q&A: Overhead Ramp Spring for Rear Door of 2005 Featherlite 1648 Snowmobile Trailer
- Shop: Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 80-lb Capacity
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Single Spring - 150-lb Capacity
- Shop: Replacement M-3 Universal Mounting Kit for Conventional Ramp Door Springs
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR1902 Review
- Q&A: Ramp/Door Spring Recommendation for 2011 Homesteader Enclosed Trailer
- Video: Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA8207
- Q&A: Overhead Clearance Necessary to Install Enclosed Trailer Ramp Spring ERS120D81
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 150-lb Capacity
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Shop: Trailer Hitch
- Video: Lippert SolidStep RV and Camper Steps Installation - 2019 Jayco Eagle Fifth Wheel
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Search Results: 68149
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: The Club Utility Lock Review
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Article: Trailer Tire Sizing
- Q&A: Fuse Location for Trailer Brake Controller on a 2005 Chevy Silverado
- Video: Roadmaster Sterling All Terrain Tow Bar Inner Arm Replacement Installation
on Trailer Ramp Springs
