Hitch Cover for Pro Series 20K Slider

Question

Question:

What hitch cover should I use for a Pro Series 20k slider 5th wheel hitch.

asked by: Levin C

0

Expert Reply:

The hitch cover which is going to fit your Pro Series PS30121 is the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116.

This cover is 24" wide x 24" long x 18" high, which is more than enough cover for the 20-1/2" wide x 22" long Pro Series fifth wheel.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We have a couple cover options that will work nicely with your B&W Companion Slider #BWRVK3400. For something that will just cover the hitch head we have the Reese part #RP30055. This is a really nice cover that secures over the hitch using an…

view full answer...

Answer 2

I do have an option for you though there is not a custom fit cover for the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3400. That said, we do have a universal option for you in the Classic Accessories Cover for…

view full answer...

Answer 3

The Reese 5th Wheel Trailer Hitch Cover #RP30055 is a great option for a cover that will fit the head of the B&W Companion 20K #BWRVK3300. If you are looking for something that more or less drapes over the hitch then I recommend going with the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 10

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Hitch Cover for Pro Series 20K Slider

Product Page this Question was Asked From

Continue Researching