Replacement Axle Needed for a Yachtclub 10X101 Aluminum Tilt Snowmobile Trailer
Question:
Need axle and hub replacement parts for a Yachtclub 10X101 aluminum tilt snowmobile trailer
asked by: Bill
Expert Reply:
For a replacement standard axle you will need to measure your hub face and spring center distances and choose an axle that has the same measurements and is rated properly.
For example, the Trailer Axle w/ Electric Brakes # e43SR is rated for 3,500 lbs and has a hub face measurement of 89" and 74" for the spring center measurement (see attached picture).
I have attached a link to our selection of axles for you to filter through for your decision. This link also includes our Timbren Axle-Less selection like part # A35RS545E rated for 3,500 lbs. The Axle-Less systems take all of the measuring out of the equation, but since they install on the trailer frame they may not be compatible with your aluminum trailer.
I recommend checking with your trailer manufacturer about drilling into the trailer frame. If you can then I highly recommend the Timbren selection as they also help to increase ground clearance.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Axle Recommendation for Yachtclub Snowmobile Trailer Rated for 1,880 Pounds
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 2,000 lbs
- Search Results: trailer drop axle
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Search Results: torsion axle
- Article: Where to Position the Trailer Axle?
- Search Results: snowmobile trailer parts
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: dust caps
- Article: Trailer Tire Sizing
- Shop: Gooseneck Hitch