Availability of 6 Pin to 7 Pin Adapter

Question

Question:

I AM LOOKING FOR A CABLE WITH A 6 PIN MALE ROUND TERMINAL CONNECTOR TO A 7 PIN FLAT TERMINAL CONNECTOR. To be used to hook a slide on truck camper to 2014 Dodge Ram 2500 truck

asked by: Roy C

0

Expert Reply:

There a couple adapters which might work for you, the Hopkins # 47435 6-Pole to 7-Pole or the RoadMaster # RM-146-7. I've left links to video reviews of both adapters for you to take a look at.

expert reply by: Kyle S

0

Answer 1

To install the a brake monitor light on your 2017 Tiffin Allegro Red you will want to use the brake controller port that will be to the left of the steering wheel under the dash. The actual part number for that connector from Freightliner is PAC…

view full answer...

Answer 2

If you are only using a 4 way from your motorhome it won't have the 12V power line to charge your battery in your toad. If you use a 7-way then it has that already integrated if it is connected properly. I recommend using a 7-way on your…

view full answer...

Answer 3

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

view full answer...

Answer 4

The wire of the Roadmaster battery charge line kit part #RM-156-25 that you referenced was designed to wire to the 12 volt accessory circuit of the trailer wiring. So yes, the pin in the 1:00 position. On a 6-way the center pin is the charge line so…

view full answer...

Answer 5

To connect the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 to your tow vehicle, you're going first want to mount the included circuit breaker with the included self tapping screws. Next, you're going to want to strip the…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Availability of 6 Pin to 7 Pin Adapter

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching