Should There be a Space Between the Bearing and Seal on a Hub
Question:
On my 1970 Dilly boat trailer there is a space of 1/8-3/16 inch between the grease seal and the inner bearing when installing this kit. This is my first time to try to install bearings/kit. Should there be a gap? If so, what keeps the bearing from moving back toward the seal and/or back and forth between the seal and the race?
asked by: Bryan H
Helpful Expert Reply:
Although there is no specific measurement for that space between the bearing and grease seal, when installing the seal you will only insert it enough so that it is flush with the hub. This is the same case if you are installing the Bearing Kit # DL21792 that you referenced.
I have attached a video of a seal being replaced that you can use as a reference.
Also, you will want to be sure that the bearings and seals that you use for replacements are the exact same as what you have now.
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK52VR
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 7,000 lbs
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Article: Most Popular Wheel Bearings
- Search Results: bearing race tool
- Search Results: marine grease
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: l44649
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: How Tight Should Spindle Castle Nuts be Tightened
- Article: What is Boondocking
- Q&A: Mounting Hole Pattern of the Demco Channel Tongue Trailer Coupler DM15945
- Video: BoatBuckle Vertical Rod Hold Down System Review
- Shop: BoatBuckle Fishing Rod Hold-Down PLUS System - 4 Rods with Reels - Deck Mount
- Shop: BoatBuckle Vertical Rod Hold-Down PLUS System - 8 Rods with Reels - Deck or Gunwale Mount
- Q&A: Dimensions Of The BoatBuckle Vertical Rod Hold-Down PLUS System
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Q&A: Replacement Trailer Axle Recommendation for a 4 by 8 Utility Trailer
- Search Results: brake kits
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: bearings
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)