Recommended Replacement Hubs, Bearings, And Grease Seals For A 2,200lb BTR Spindle
Question:
My trailer has a straight 1.06" diameter shaft. From the shaft shoulder to the tip of the threads is 4.25". 5 lug 13" tire on 5 on 4.5 rims. I'm guessing fully loaded 2200 lbs? I can't do high end hubs so middle of the road will have to do.
asked by: Steven B
Expert Reply:
Given the information you've provided the best option is going to be the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized # 8-258-50UC1. This hub is going to come with the inner bearing # L44649 and race, outer bearing # L44649 and race, grease seal, grease cap, and galvanized lug nuts included so that you won't have to purchase them separately. The only thing you'll need to purchase separately is some marine grease # L74FR to pack your bearings and lube the spindle.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Mystik JT-6 High Performace Synthetic Grease - 1 Lb Can
- Lubricants Sealants Adhesives
- Grease
- Marine Bearing Grease
- Multi-Purpose Grease
- Synthetic Grease
- 16 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK52VR
- Search Results: marine grease
- Shop: Mystik JT-6 High Performace Synthetic Grease - 1 Lb Can
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Grease - L74FR
- Search Results: bearing race tool
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer hub
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer jack
- Search Results: cotter pin
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Video: Review of TruRyde Washer For 1 Inch Spindle - SW1000
- Video: Review of ABS Fasteners 1-3/4 Castle Nut Cotter Pin - 165649
- Article: Overview of Lubricating Grease
- Q&A: Should There be a Space Between the Bearing and Seal on a Hub
- Q&A: Can a Trailer Grease Seal Be Pressed In Too Far Beyond Flush
- Search Results: grease
- Search Results: trailer tires and wheels
- Video: Performance Tool Plastic Bearing Packer Review
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: Is it Better to Pack Hub with Grease by Hand or with Grease Gun
- Q&A: How Hot is Too Hot for Trailer Hubs
- Q&A: Grease Recommendation to Use on Trailer Hub/Drum Kits
- Q&A: What Wheel Bearing Grease do You Recommend?