Replacement Exhaust Fan Motor for Bathroom Exhaust Fan

Question

Question:

I am looking for a motor for what appears to be a ventline bathroom exhaust fan motor, the motor I have looks the same as BCD0314-00 but the shaft is7/32inch and is 1 1/4long also from the end of the shaft to the mounting surface is 3inch and mounting bolts are 1 7/8inch center please can you tell me what I need. Thank you

asked by: Tom M

0

Expert Reply:

The Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan # BCD0314-00 is 3--1/2 inches from shaft end to mount with the shaft diameter being 3/16 inch.

The Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents # BCD0390-01 is 3 inches to mounting surface from the end of the shaft and the shaft is 1.45 inches from the end to the closest surface. The shaft is 7/32 inches in diameter, and the mounting bolt are the 1-7/8 inches on center, so I believe this is the replacement part you need even thought the shaft is slightly longer.

I've attached a photo to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

We have just what you are looking for. The replacement motor for your V2265 fan is part #BCD0390-01. The fan blades are at times difficult to remove from the old fan so if you need to replace that as well you can use part #BVA0312-00.

view full answer...

Answer 2

The replacement motor for the Ventline 2265 model van is #BCD0390-01. The motor you referenced for a Ventline 2265 fan. #BCD0388-00, is not a replacement motor for the 2265 fan model.

view full answer...

Answer 3

Some versions of the Ventline fan V2265 have the plug that part #BCD0390-00 connects right into. Not all of them do and you can cut the connector off and hardwire it in. Or we also carry part #BCD0390-01 and hardwire it. The motors are the same. You…

view full answer...

Answer 4

We have gotten this question before and have found that the correct replacement motor for your Ventline V2265 is the Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents #BCD0390-01. Replacement parts for these fans are often used on…

view full answer...

Answer 5

The correct replacement motor for your Ventline V2265 is the Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents #BCD0390-01. The correct replacement fan blade is the part #BVA0312-00 that you referenced.

view full answer...

Answer 6

For a replacement motor for your Ventline V2062 you'd need #BCD0314-00 which also fits as a replacement for the V2262.

view full answer...

Answer 7

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 8

Yes, the Phillips V2062 and the Ventline V2062 are the same so for a replacement motor you'd need #BCD0314-00. For the replacement fan blades you will need part #BVA0312-00.

view full answer...

Answer 9

You will likely need access to the top of the vent to replace the motor on your Ventline roof vent. This means you will have to carefully get to the roof of the trailer for access. After that it is just a matter of taking out the pieces in the way,…

view full answer...

Answer 10

The replacement motor you need for a Ventline roof vent V2062 is the part #BCD0314-00 and for the fan blade part #BVA0312-00.

view full answer...

Answer 11

I spoke to my contact at Ventline and they informed me that if your Ventline Fan Model 2044 has a 100 CFM motor then you would need to use part #BCD0314-00 but if it has a 75 CFM motor then you will need to use part #BCD0390-01. If you are unsure of…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...