Is Additional Part Necessary to Prevent Breakaway Battery From Draining?
Question:
I have an enclosed snowmobile trailer with electric brakes. The wiring harness has the red wire from the 7 pin truck plug going directly to the small break away battery. I tapped into this wire to add interior lights. They come on which means they are being powered by the small break away battery. is there a device i should add in series to prevent discharging the battery for the small interior LED lights I purchased from your company? Could you recommend back up lights to purchase? LED of course.
asked by: Mark N
Expert Reply:
If you have tapped into the red wire from the 12V battery lead as in the attached diagram, the power is coming from your truck's battery and not the breakaway battery and you'd be just fine. If you are tapped into the wiring in any other manner you will want to change it to the 12V battery lead.
As for back-up LED lights I recommend the Transit LED Backup Light # BUL90CB which is a 7" clear light that is surface mounted, waterproof and corrosion-resistant. For a combination taillight/backup light I recommend the Optronics # STL68RB, which are 10-1/8" x 3-1/16", have a red lens for tail light and clear lens for backup light. You can add a snap-on trim ring # A68SSB for this light as well.
I've added links to video reviews of these lights for you to take a look at.
Products Referenced in This Question
Stainless Steel Trim Ring for Optronics STL68RB Trailer Tail Light
- Accessories and Parts
- Trailer Lights
- Light Trim
- Silver
- Optronics
more information >
Optronics LED Backup Light for Transit Vehicles - Submersible - 42 Diodes - Round - Clear Lens - 12V
- Trailer Lights
- Tail Lights
- Backup
- Round
- Surface Mount
- Submersible Lights
- LED Light
- 7 Inch Diameter
- White
- Optronics
more information >
Product Page this Question was Asked From
Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail/Backup
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 10L x 3W Inch
- Red and White
- Optronics
more information >
Continue Researching
- Search Results: rubber grommet
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Grease Seal
- Search Results: led light
- Shop: Optronics LED Backup Light for Transit Vehicles - Submersible - 42 Diodes - Round - Clear Lens - 12V
- Search Results: led trailer light
- Video: Optronics GloLight Trailer Lights Manufacturer Review
- Shop: Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Rubber Grommet for 3/4" Round Trailer Lights - Recessed Mount - Open Back
- Shop: GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Search Results: drum
- Q&A: Recommended Hubs and Wheels for Log Splitter Trailer
- Search Results: kti
- Search Results: 168233
- Search Results: licence plate light
- Q&A: Wiring Brakes On Tandem Axle Trailer
- Shop: Trailer Wiring
- Q&A: Wiring Diagram for Trailer Breakaway Kit
- Shop: Trailer Hitch
- Shop: RV Interior Lighting
- Q&A: How Bright is the Optronics Transit LED Backup Light, # BUL90CB
- Q&A: Isolating Auxiliary Battery From Draining Break Away Battery
- Q&A: Can Breakaway Battery be Used to Power Dome Lights?
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Video: Optronics RV Lighting - Ceiling Light - ILL21CB Review
- Video: Buyers Products Remote Switch LED Trailer Dome Light Review and Installation
- Video: Optronics Trailer Lights - Tail Lights - BUL90CB Review
- Video: Review of Peterson Trailer Lights - Reverse Tail Light - PE44AR