Parts Needed to Bypass OEM Trailer Wiring on a 2004 Dodge Ram 2500
Question:
I have a 2004 Dodge Ram 2500 with factory tow package. From previous experience, I know that there are undersized relays that feed the trailer electrical. These relays are known to fail. I was told that you have a kit to bypass these relays. Can you direct me to the proper kit? Thank you
asked by: Kevin
Expert Reply:
If you are wanting to bypass the trailer wiring on your 2004 Dodge Ram 2500 then we do have the parts that you need.
You will want to start off by installing the Vehicle Wiring Harness Kit # C59496. This is a universal kit that will need to be spliced into your tail light wiring and have a 12V power lead run to the battery. Once installed, this kit will give you a 4-Way flat connector for your basic trailer light functions.
For a fully functioning 7-Way connector you will then want to install the Universal Installation Kit # ETBC7.
Should you need a brake controller, I recommend the Prodigy P2 # 90885. This is one of our most popular brake controllers because of how easy it is to install and use.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Tekonsha Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Shop: Hayes Engage Trailer Brake Controller - 1 to 3 Axles - Time Delayed
- Shop: Universal Wiring Harness w/ ModuLite and Brake Controller Harness - 7-Way Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer wiring tester
- Search Results: circuit analyzer
- Q&A: Troubleshooting Brake Controller Output on a 2004 Dodge Ram 2500
- Q&A: Installing 7 Blade Trailer Side Connector
- Search Results: trailer brake controller
- Search Results: trailer break
- Search Results: trailer brake wiring harness
- Search Results: prodigy 3
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Video: Trailer Wiring Harness Adapter Installation - 2006 Dodge Ram 1500
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55504 Review
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Installing a Trailer Wiring Harness on 2004 Ram for Just Left Turn/Brake Lights for Factory 7-Way
- Q&A: Adding a 7-Way Trailer Connector to a 2004 Dodge Ram with Factory 4-Way
- Q&A: Does Curt Trailer Wiring Harness part # C55504 Fit 2002 Dodge Ram 1500
- Q&A: Trailer Wiring Connector on a 2003 Dodge Ram to Work With LED Light Installed on the Trailer
- Q&A: Installation Of Curt T-Connector Vehicle Wiring Harness On 2002 Dodge Ram Pickup
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams