Recommended #84 Spindle for a Hot Walker
Question:
Do you sell a spindle that matches this hub assembly? Im working on hot walker, not a trailer, so I have no current spindle. I just need the proper size spindle that matches this hub so I can weld in onto the hot walker. Thanks
asked by: Brandon H
Expert Reply:
The etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles part # AKHD-545-35-EZ-K is designed to work with an #84 spindle that has an inner bearing L68149 (1.378" inner diameter) and an outer bearing L44649 (1.063" inner diameter). Therefore, for a spindle that will work with this hub assembly, I recommend using part # TRU24FR
for round or part # TRU47FR for square.
Products Referenced in This Question
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Q&A: Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17