Bracket Recommendation for Holding 7-Way Bracket to Square Trailer Hitch

Question

Question:

Were do you mount the bracket that holds the 7 blade trailer plug toa 2015 dodge grand caravan can i put it right in hitch with selftapping

asked by: Bob

0

Expert Reply:

You could use the bracket # C57202 to attach the bracket you have in your hand to the square crosstube of the hitch. This uses a metal strap to attach to the hitch.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We do have 4 different kits listed from 2 different manufacturers. The first is the Curt #C59236 which is a universal style harness that will give you a 4-way flat connector. This is needed if your 2022 Hyundai Santa Cruz does not have the factory…

view full answer...

Answer 2

I would be happy to help you find a trailer hitch and wiring harness for your 2022 Hyundai Santa Fe. Lets start with the trailer hitch, I recommend the Curt Trailer Hitch Receiver item #C34ER. This is a custom fit hitch with a 2" receiver that…

view full answer...

Answer 3

We definitely have what you need! For your 2021 Kia Sorento with a standard 235/60-R18 tire, I recommend using the Curt Hitch - 2" #C34ER. Not only does this hitch provide you with the highest weight capacity we offer for your vehicle, it also…

view full answer...

Answer 4

I do not have any information on the factory trailer hitch for your 2014 Jeep Grand Cherokee but if you take a look at the attached photo, you can see a welded tab which will be used to mount a trailer connector like the 7- and 4-Pole Trailer…

view full answer...

Answer 5

Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…

view full answer...

Answer 6

For your 2019 Hyundai Santa Fe I highly recommend the Curt T-Connector Vehicle Wiring Harness #CU94FR. This custom harness is designed specifically for your vehicle, and it will plug right into a factory port behind the rear bumper (on the…

view full answer...

Answer 7

That is correct. A 7-way adapter like the Curt Trailer Connector Adapter #C57672 has a blue wire which connects to a typical brake controller in your vehicle. The brakes on your trailer cannot be used without a brake controller. You need the brake…

view full answer...

Answer 8

Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C68JR which is a plug-in fit.

view full answer...

Answer 9

A four-pole connector is the connector that gets connected to the trailer wiring from the tow vehicle. It is called a 4-pole connector because the connector has 4 poles that carry 4 different tail light circuits. Most people will store the 4-pole…

view full answer...

Answer 10

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part #C68JR that you referenced and then instead use the 7-way/4-way socket part #30955 in place of the included 7-way and you'd…

view full answer...

Answer 11

Due to the limited space available in the cut out area around the receiver on your 2017 Hyundai Santa Fe the Curt Easy Mount Bracket #C58000 will not be a fit. Your best option is to use bracket #C57202 around the hitch to the left of the receiver…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Bracket Recommendation for Holding 7-Way Bracket to Square Trailer Hitch

Product Page this Question was Asked From

Continue Researching