Lug Nut Recommendation for Trailer Wheel # AM22654

Question

Question:

Which lug nut do you recommend? stainless? chrome? the longer lug nuts?

asked by: John E

0

Expert Reply:

If your trailer hubs have the standard 1/2 inch diameter thread the correct lug nut you'd want is the part # AM26NR which will fit and work well. These are a stainless acorn style.

expert reply by: Jameson C

0

Answer 1

Lug Nut torque for the Aluminum Trailer Wheel #AM22654 will be between 90 and 100 foot lbs torque based on the 1/2 x 20 wheel studs and 15 inch aluminum wheels. Because the wheel bolt holes are reinforced with the improved clamp force technology, I…

view full answer...

Answer 2

The Kenda S-Trail ST145R12 Radial Trailer Tire with 12" Aluminum Wheel - 5 on 4-1/2 - Load Range D #AM31202 referenced in your question is a great radial tire that has a maximum load of 1,220 pounds at 65 psi. The aluminum wheel features a 5 on…

view full answer...

Answer 3

Based on your picture it looks like the part #AM22657 is the exact wheel you need. The most common used lugs with this wheel are the part #AM26NR which are the correct lugs for if the wheels use the standard 1/2 inch diameter studs. I would be…

view full answer...

Answer 4

A 5.30x12 tire like the one in the Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range B #AM30740 combo and an ST145/R12 like the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 -…

view full answer...

Answer 5

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 6

Yes, the Kenda ST145R12 Radial Trailer Tire w/12" Galvanized Spoke Wheel #AM31202 is just going to be slightly shorter and wider. With the section width being 5.7" instead of the 5.6" you currently have your wheel would just sit…

view full answer...

Answer 7

I have what you need, but they are not sold together and mounted. You would need the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range D #AM10130, these have an M speed rating of 81 mph. For a wheel, the Aluminum Lynx Trailer Wheel -…

view full answer...

Answer 8

You should be able to use the Americana Trailer Wheel Lug Nut #AM26NR. This fits 1/2" - 20 studs so just make sure that's what you have prior to ordering. You can verify this by measuring the diameter of your studs as the thread count should…

view full answer...

Answer 9

The torque specs for your 2008 ce7 Canadian Trailers car trailer will be dependent on the lug nut size. The axle capacity and whether or not it has electric brakes will not change the specs for the wheel lug nut torque. I've attached a chart to…

view full answer...

Answer 10

The Kenda #AM31202 you referenced is a Tire+Wheel combo that features the Kenda Karrier ST145-80R12 (Load-D) ST tire. You can buy this as a tire only by ordering Kenda item #AM10130.

view full answer...

Answer 11

I have a solution for you, but the Aluminum Lynx Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Silver #LH45FR does not come with lug nuts or center caps. For lug nuts you can use the Chrome Trailer Wheel Lug Nut - 1/2" (Each) #12CLN and…

view full answer...

Answer 12

Aluminum wheels actually have steel inserts where the lug nuts touch them so there is no need for an adapter and you can just bolt the wheel right up. I don't know what size wheel you are looking for but I attached a link to all the aluminum…

view full answer...

Lug Nut Recommendation for Trailer Wheel # AM22654

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching