Comparing Gas Volume and BTU Specs for Propane Quick Disconnects 104052-MBS and CAM59853

Question

Question:

MB Sturgis quick connection rating is 40.000 BTU. What is the BTU rating for the Camco quick connection.

asked by: Joe M

0

Expert Reply:

The Camco Quick-Connect Kit for Low Pressure Propane Systems # CAM59853 has the same fittings and dimensions as the MB Sturgis Quick Disconnect # 104052-MBS so it will pass an identical volume of propane (40-standard cubic feet per hour) and deliver the same 40,000 BTUs.

expert reply by: Adam R

0

Answer 1

Regulators normally have 1/4 inch not 3/8 inch connections as does the small appliance. If this is what you have the Quick Disconnect Propane Hose - 1/4" Male NPT - 10' #37207-31135 along with the MB Sturgis Quick Disconnect Propane…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Most RV propane systems use a low pressure regulator because the appliances are low pressure. You can check the information stamped into your regulator to determine if it is high or low pressure or offers both. High pressure regulators are usually 30…

view full answer...

Answer 8

The maker of your trailer is really the only reliable source for its specifications and capacities. In my research on the Wells Cargo website I too was unable to find any roof details about your trailer other than that the aluminum roof on the 6 x 10…

view full answer...

Answer 9

If you're getting that much bounce out of your trailer that would lead me to believe that maybe the MORryde IS suspension system is the actual issue. Typically if the suspension is too stiff you'll start to bounce. We see this issue a lot…

view full answer...

Answer 10

The MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 6' #100476-72-MBS is a great hose to have for your gas grill so you don't need to deplete the propane supply of your trailer tanks. For your gas…

view full answer...

Answer 11

Technically you can use any T-fitting, including one like the MB Sturgis Sturgi-Stay T-Fitting for POL Valve #103537-MBS before or after your propane regulator. The correct placement and T-fitting is going to depend on what you are trying to hook up.…

view full answer...

Answer 12

We have exactly what you need, a hose with a regulator that will attach to your 20 lb propane tank and a quick disconnect on the other end. The correct part number is the following: - Propane Quick-Disconnect Hose with Regulator #37207-31275

view full answer...

Comparing Gas Volume and BTU Specs for Propane Quick Disconnects 104052-MBS and CAM59853

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching