10K Torsion Axle Compatibility With Disc Brakes
Question:
Need a new EOH activator for my trailer. Had a Hydrastar 1600 that just quite working after 2nd trip with new truck, wondering about compatibility issues. New truck pulling this trailer is Ram 2016 5500 with factory controller, Hydrastar was a 2007, should these play together or not. Never had an issue with older truck pulling this trailer with an aftermarket controller. We took a gold hydrastar of an older trailer we don't use and it keeps making this clicking noise and keeps the brakes on faintly still causing heat. What unit should I buy for this truck to eliminate these issues . Thanks in advance.
asked by: John J
Expert Reply:
The disc brake kits like # K2R1058D13 are designed for torsion axles and disc brake rated EOH systems which have a higher 1600 psi level than drum brake actuators. This is currently the only kit we have compatible with 10K torsion axles from Lippert or Dexter.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Kodiak Disc Brakes - 13" Rotor - 8 on 6-1/2 - Raw Finish - Torsion - 10K Dexter and Lippert
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Rotor
- 10000 lbs Axle
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Brake Controller
- Shop: Kodiak Disc Brakes - 13" Rotor - 8 on 6-1/2 - Raw Finish - Torsion - 10K Dexter and Lippert
- Shop: Front Mount Hitch
- Q&A: What is the Torque Spec of the Spindle Nut on a Dexter E-Z Lube Axle
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- Q&A: Brake Controller Installation on 2006 Hummer H3 Using # ETBC7 Brake Controller Install Kit
- Shop: Brophy Clevis Mount for 2" Trailer Hitches - 1" Diameter Hole - 6,000 lbs
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Search Results: clevis pin
- Search Results: clevis pin ball mount
- Shop: Curt Universal Tail Light Wiring Kit for Towed Vehicles
- Shop: Vehicle Tow Bar Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Trailer Wiring
- Search Results: prodigy 2 brake controller wiring harness
- Search Results: dbc~250
- Search Results: dbc 250
- Search Results: winch
- Search Results: 10000 torsion axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Gooseneck Hitch
John J.
10/5/2017
Need a new EOH activator for my trailer. Had a Hydrastar 1600 that just quite working after 2nd trip with new truck, wondering about compatibility issues. New truck pulling this trailer is Ram 2016 5500 with factory controller, Hydrastar was a 2007, should these play together or not. Never had an issue with older truck pulling this trailer with an aftermarket controller. We took a gold hydrastar of an older trailer we don't use and it keeps making this clicking noise and keeps the brakes on faintly still causing heat. What unit should I buy for this truck to eliminate these issues . Thanks in advance.