Connecting a Coleman NXT200 Grill to a Camper
Question:
Hello I have a Keystone 171exp camper with what I believe is a standard low pressure connector. I would like to connect my Nxt200 to the campers. Will this kit also work for me? If not are there connectors, adapters and longer hoses I can purchase to accomplish this? Thank you for any assistance you can provide
asked by: Michael G
Expert Reply:
Since the Camco Low Pressure Conversion Kit # CAM57638 that you referenced is designed to work specifically with the Olympian 4100 Grill, it is not compatible with your Coleman NXT200 due to the fittings.
From what I found about the Coleman NXT200 it looks like you will need the Camco Propane Hose Assembly # CAM59823. This will enable you to go from using a 1-lb disposable propane cylinder to a 20-lb 0r 30-lb propane tank like what your camper would be using. The part I mention is a 5 foot hose. If you need a longer hose you can use part # CAM59825 which has a 12 foot hose.
I have attached a review video for you to checkout as well.
Products Referenced in This Question
Camco Propane Hose Assembly - 5' Long
- Propane Fittings
- Hoses
- Adapter Hoses
- 5 Feet Long
- Type 1 - Female
- 1 Inch-20 - Male
- Camco
more information >
Camco Propane Hose Assembly - 12' Long
- Propane Fittings
- Hoses
- Adapter Hoses
- 12 Feet Long
- Type 1 - Female
- 1 Inch-20 - Male
- Camco
more information >
Continue Researching
- Shop: Camco Quick-Connect Kit for Low Pressure Propane Systems - Valve and Full Flow Plug
- Shop: MB Sturgis Sturgi-Stay T-Fitting w/ Hose - POL Valve - 2 Model 250 Quick-Disconnect Ports
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Shop: Trailer Hitch
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: JR Products Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator Review
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: 68149
- Search Results: dust cap
- Article: Trailer Maintenance Schedule
- Shop: Brake Controller
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Search Results: equalizer
- Shop: Gooseneck Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End