bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

How to Determine the Correct Lift Spacer Needed for Installing Ride-Rite Airbags on a Lifted Truck  

Question:

Looking to order the Ride rite lever kit #2430 for my 2014 GMC Sierra 1500. However it does have a 6inch Fabtech lift kit. What size and part # spacers do I need to order? Thanks much

1

Helpful Expert Reply:

Since you have a 6" lift on your 2014 GMC Sierra 1500 you will need a lift spacer in order for the Firestone Ride-Rite Air Helper Springs part # F2430 to work.

The correct way to measure for a lift spacer is when the truck is on the ground without any added weight in the bed. You will want to measure from the bottom of the top bracket to the top of the bottom bracket where the airbags attach. You can choose the right spacer using the measurements attached below.

Space From Top To Bottom Bracket:

6.5" to 7.5" - part # F2536
7.5" to 8.5" - part # F2366
8.5" to 9.5" - part # F2368
10.5" to 11.5" - part # F2373
11.5" to 12.5" - part # F2374

The spacers will need to be placed between the top of the lower bracket and the bottom of the airbag. In order to operate the airbags from inside the vehicle I recommend using the Firestone Air Command I part # F2158.

expert reply by:
1
Conner L
Ask The Experts a Question >>

Products Referenced in This Question







Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for F2158Instructions for F2368Instructions for F2430
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>