Replacement Seal Strips for Yakima Skybox Series Rooftop Cargo Box

Question

Question:

Replacement seal strip part 8870086

asked by: Brandon B

0

Expert Reply:

The Replacement Seal Strips for Yakima SkyBox Series Rooftop Cargo Box 2006 and Newer - Qty 4 # 8870086 is a fit for 2006 boxes and newer. It will fit models # Y07337, # Y07336, as well as the discontinued boxes Y07198 and Y07197.

expert reply by: Jason S

0

Answer 1

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 2

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

I recommend the Thule WingBar Evo roof rack for your 2024 Subaru Outback Wilderness. For this you will need the Crossbars #TH711320 and Feet #TH710401. I prefer this system as the crossbars use a 2-piece channel seal which allows you to easily add…

view full answer...

Answer 7

Yes, you can cut the Rhino-Rack RTC-style tracks to the needed length without voiding the warranty. The RTC-style tracks are available in a number of different lengths: - 71" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount #RTC18 -…

view full answer...

Answer 8

No, you cannot cut the crossbars on the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT down to size. The channels on the bottom under the crossbar do not run all the way down the bar, so cutting them could impact the mounting points.…

view full answer...

Answer 9

You could trim the Rhino-Rack roof rack tracks #RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set…

view full answer...

Answer 10

It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up…

view full answer...

Answer 11

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...

Answer 12

I spoke with Yakima, and they said that the Replacement Lid Support for Yakima Cargo Boxes #8880684 and the Replacement Lid Support for Yakima Cargo Boxes #8880683 are the essentially the same thing minus the spring color, oddly enough. But, even…

view full answer...